-
printing on a cr-30
hi
i just got an creality CR-30 (belt printer)
and tried printing some pieces but i’m having …
Started by: 
neroes
- 2
- 4
-
2 days, 2 hours ago
Ronald Rickard
-
Ender 3 (v2) Filament Grinding
I’ve been working on printing my Rampage Crypt tiles, but I keep having problems with the PLA…
Started by: 
darth_giles
- 2
- 4
-
5 days, 5 hours ago
darth_giles
-
Branches failing on print (Ender 3 V2)
Hi all,
I have an Ender 3 V2 and have backed the Shadowfey Kickstarter. I’m currently trying …
Started by: 
Richard Baker
- 2
- 2
-
3 weeks, 2 days ago
Nicholas Jebson
-
What should it look like?
I matched my settings to the recommended settings I found on this website. Heat, brim. .2mm layer …
Started by: 
Scott Andreu
- 3
- 5
-
3 weeks, 3 days ago
Stephaned38
-
Problems with IA Schist Wall (Both with and without Top Locking)
I have a problem printing the IA schist wall, both with and without top locking. The bottom of the…
Started by: Ronald Rickard
- 2
- 8
-
1 month, 3 weeks ago
Nicholas Jebson
-
Bed wandered off while printing Rickety Bridges
So I am on an Ender-3 and I was printing the 3” Rickety Bridge when my nozzle wandered off to the u…
Started by: 
davidsmdixon1
- 2
- 2
-
1 month, 3 weeks ago
Nicholas Jebson
-
Having a bit of problems
I’ve just recently gotten a 3d printer to help get some terrain on my table. so far I’v…
Started by: 
commissar_roach
- 2
- 2
-
1 month, 4 weeks ago
Nicholas Jebson
-
Door not sliding within Door Arch
Hello
I have printed Rampage Door from “Heavy Door” set: the door is too big (or Arch s…
Started by: 
Jean-Baptiste CANNES
- 2
- 9
-
2 months, 1 week ago
Nicholas Jebson
-
Printing Buildings at 15mm
Hi! I usually print the buildings at 28mm, however, I started a project and want to do 15mm. The fr…
Started by: 
marksconyers
- 2
- 6
-
2 months, 2 weeks ago
Nicholas Jebson
-
Floor Tile Issues
Hello,
I am testing the tiles using the free base back. I am having issues with filament hanging do…
Started by: 
dmonterosso
- 2
- 2
-
2 months, 3 weeks ago
Sam Campbell
-
Unwanted infill on Openlock?
I’m much more used to my resin printer, but I’ve recently dipped my toe in PLA in order…
Started by: 
Leynok
- 2
- 3
-
3 months ago
Leynok
-
Gnarly First Layer for Gnarly Trees
Trying to print the canopies for the Gnarly Trees and inevitably it the nozzle keeps ripping up the…
Started by: 
jdelise89
- 3
- 3
-
3 months ago
Nicholas Jebson
-
Shadowfey Bridge Span check model design
Hello!
Just printed Bridge-Span-Ext-B-v.1.1 and Bridge-Span-Ext-B-Planks-v.1.0 doesn’t fit it…
Started by: 
t.filipek
- 2
- 2
-
3 months, 2 weeks ago
Nicholas Jebson
-
Tiles come apart after printing.
My tiles pull apart after I print them. I uploaded the proper specs into cura but my tiles still pu…
Started by: 
pikilik
- 2
- 3
-
5 months, 1 week ago
Nicholas Jebson
-
Infill issue with schish walls/battlements
Hi –
I’m printing Clorehaven stuff on my Prusa i3 Mk3S and I’m loving it – …
Started by: 
Nicholas Strugnell
- 5
- 9
-
6 months, 1 week ago
Nicholas Jebson
-
Removing Supports from Resin Prints
I’ve been printing lots of Openlock parts lately, some on my FDM (Monoprice Select Mini V2) a…
Started by: 
Randall Hand
- 2
- 2
-
8 months ago
Nicholas Jebson
-
First Print Troubleshooting
Hello Folks!
New to Printable Scenery and 3D printing in general. Just set up my Ender 5 Pro (No Mo…
Started by: 
Akhil Malik
- 2
- 2
-
8 months, 3 weeks ago
Sam Campbell
-
Problem Printing “Legs” of OpenLock tiles
Hello! A niggling problem I am having with my printer are the support areas in parts for the dungeo…
Started by: 
nathaniel.schleif
- 1
- 1
-
1 year ago
nathaniel.schleif
-
Problems printing Gloomwood Eyrie
So i’m having problems printing the 2nd floor of the Gloomwood Eyrie, as you can see on the p…
Started by: 
aylizia
- 2
- 17
-
1 year ago
Nicholas Jebson
-
Ender 3 hanging strings
Hey guys, running my Ender 3 with all the recommended settings, using the profile that was suggeste…
Started by: 
Jacob Nichols
- 2
- 5
-
1 year, 1 month ago
Jacob Nichols
My Account 
