Cart (0)

Winterdale-Tavern-Base-D-v.1.0

  • Author
    Posts
    • #309337
      Avatarmiekah68
      Participant

      The print has failed repeatedly in the area that supports the canopy (Right above the wall on the left side that will support the Canopy). I have tried printing it 2 times so far, 80 hours have been spent on this print. I have changed the nozzle, Used a different PLA fliament. and its in the same exact spot.

      Attachments:
    • #309453

      Oh No!
      Could you share a screenshot of your slicer settings please? It’ll help us get to the bottom of it
      Sometimes it can be the printer head speed that knocks smaller upright pieces if it moves too fast. Potentially its also something with the upright infill %

    • #309469
      Avatarmiekah68
      Participant

      Yes I will get you a screenshot when I get home. Anything in particular I need to screenshot?

    • #309503
      Avatarmiekah68
      Participant

      here is a screenshot. thank you for looking into this.

      Attachments:
    • #309524
      Avatarmiekah68
      Participant

      and here is more info

      Attachments:
    • #310054
      Avatarmiekah68
      Participant

      Just wondering if you have all the information after I posted it, I never saw a reply since the one you asked for info.

Viewing 5 reply threads
  • The forum ‘Resolving 3D Printing Problems’ is closed to new topics and replies.
©2022 Printable Scenery. Website by Vienna & Bailey