Cart (0)

Product Categories+

Small Rustic Barns


The Small Rustic Barns compliment the more prominent buildings with a flat side so they can sit flush against them. Removable roofs mean miniatures and furniture to be placed inside easily and allow gaming access.

This product is part of the Country and King Late pledge. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.


Much is the traffic on the king’s road; many are the oxen and horses that cart goods to and from his majesty’s fair city. Rustic barns are near as common as homesteads on the outskirts of town, a welcome sight for those hard-working beasts of burden and their wary masters to pass a night before the long road home again.

Notes for Small Rustic Barns STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

3D printable small rustic barns

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


requires supports for resin printing, Prints without Supports

3 questions for Small Rustic Barns

  1. DeathThorn (verified owner)

    Hi there I try to slice Small-Rustic-Barn-B-opt1-v1.1.stl in Cura and all the time stop at 15%
    can You check the file plz ??

    • Jo Boorer (verified owner)

      There is currently an issue with the latest versions of cura. We use the 4.8 version, and I just double-checked it, and it goes through fine.
      Our models are also checked in Netfabb and Prusa Slicer for errors before release.

  2. DeathThorn (verified owner)

    ok but why then others files from this pack works and this one not 🙁

    • Matt Barker

      This is because the printer or slicer is having issues with a certain part of the model. If you can see that it slices correctly in the slicer then the issue can only be between the slicer and the printer. We have seen these issues in the latest version of Cura. I reached out to them last month to see if they were working on a fix but haven’t heard back.

  3. DeathThorn (verified owner)

    ooo I change some Experimental settings in Cura 5.2.1 and slice this file 🙂 now print test

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2023 Printable Scenery. Website by Vienna & Bailey