Small Rustic Barns

Name: Small Rustic Barns
Brand: A Song of Ice & Fire
Availability: InStock

$5.95

Any sales taxes will be calculated in the checkout.

The Small Rustic Barns compliment the more prominent buildings with a flat side so they can sit flush against them. Removable roofs mean miniatures and furniture to be placed inside easily and allow gaming access.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Much is the traffic on the king’s road; many are the oxen and horses that cart goods to and from his majesty’s fair city. Rustic barns are near as common as homesteads on the outskirts of town, a welcome sight for those hard-working beasts of burden and their wary masters to pass a night before the long road home again.

Updates:

29 November 2024 (version 1.2) The model size has been increased by 10% to better align with the 28mm scale.

Notes for Small Rustic Barns STL:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
First Published version 1.1

Small Rustic Barns

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How to paint Medieval Textures

Posted on November 3, 2022July 24, 2025 by Mike Los

In a previous post we covered how to paint the stone walls from the Country and King buildings. This article shows you how to paint medieval textures used on the terrain. In particular, the wood, roof tiles, wattle & daub, and hay. Wood & Roof Tiles After undercoating, basecoat the Wood with Oak Brown and… Read more

2 Comments

How to paint realistic Stone Walls

Posted on August 11, 2022July 24, 2025 by Mike Los

In this article, we’re going to show you how to paint the realistic looking stone walls from Country and King, and its easier to achieve than you might think. After doing plenty of research, and trial & error, we’ve come up with an effective method to recreate the pale stone look of medieval Europe. You’ll… Read more

24 Comments

Comments

DeathThorn (verified owner) – December 16, 2022

Hi there I try to slice Small-Rustic-Barn-B-opt1-v1.1.stl in Cura and all the time stop at 15%
can You check the file plz ??
- Jo Boorer (verified owner) – December 16, 2022
  
  There is currently an issue with the latest versions of cura. We use the 4.8 version, and I just double-checked it, and it goes through fine.
  Our models are also checked in Netfabb and Prusa Slicer for errors before release.
DeathThorn (verified owner) – December 16, 2022

ok but why then others files from this pack works and this one not 🙁
- Matt Barker – December 19, 2022
  
  This is because the printer or slicer is having issues with a certain part of the model. If you can see that it slices correctly in the slicer then the issue can only be between the slicer and the printer. We have seen these issues in the latest version of Cura. I reached out to them last month to see if they were working on a fix but haven’t heard back.
DeathThorn (verified owner) – December 18, 2022

ooo I change some Experimental settings in Cura 5.2.1 and slice this file 🙂 now print test
glenn.roedel (verified owner) – April 22, 2024

what is the base scale on these? I need to convert them to 1/72 or approx. 25mm.