Name: Clorehaven Library Expansion
Brand: Dungeons and Dragons
Availability: InStock

Description

Clorehaven Library is the regional center of learning, history and arcane knowledge for the local region. Many an adventurer would visit to research local lore or apprentice wizards needing to brush up on their cantrips.

To build the library as pictured you will require pieces from other sets including Rustic Stone Floors, Rustic Wooden Floors, Rustic Stone and Wood Stairs, Schist Walls, Tudor Walls and Wooden Balcony Walls sets. To assemble the Library and other buildings of Clorehaven you can download the Assembly Guides .

Link to Door Assembly Guide.

Updates:

24 October 2019 (version 1.1) Spiral stair with railing added.

Notes for Clorehaven Library Expansion:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
Reference sheet for small printer option included in zip file.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	100% for resin printing, 10%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Clorehaven Modular Roofs Assembly Tips

Posted on November 22, 2019July 23, 2025 by Matt

To assemble the roofs from the Modular Shingle Roof we’ve provided some helpful diagrams of some configurations.

3 Comments

Painting Guide: Clorehaven

Posted on October 25, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint the city of Clorehaven. The models were initially primed with Army Painter Matt Black Stone This is the scheme used on all the stone. Heavy dry-brush: Army Painter Dungeon Grey. Lighter dry-brush: Army Painter Ash Grey. Wood & Stucco This is the scheme used on all… Read more

10 Comments

Clorehaven Assembly Guides

Posted on September 6, 2019July 23, 2025 by Matt

To assemble any of the Clorehaven buildings you can download the following assembly diagrams: Basic House (from Clorehaven Trial Pack) Alchemist Guild The Manor Inn Chapel Inn of the Welcome Wench Homestead Tavern Townhouse Watch Tower Cottage Grand Hostel Terrace Housing Library Guardhouse Stone Barn Modular Battlement There will be additional diagrams added for the… Read more

102 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

Nikolaj_Uhrenholt (verified owner) – October 18, 2019

Are you serious about support: “Requires support on all files”?
- Sam Campbell (verified owner) – October 21, 2019
  
  It’s now been updated.
christopherlnance (verified owner) – October 24, 2019

The instructions for the Library for lvl 2 #3 Product Clorehaven Library Expansion/File Name F-SpiralStair-RusticWoodandStone-Railing-v1.0, This file does not exist. There is a SpiralStair but it does not have the railing. Was this a typo in the PDF or is there a file missing? Thanks.
- Sam Campbell (verified owner) – October 24, 2019
  
  This will be updated shortly and you will be able to re-download the files.
insanejigsaw (verified owner) – November 14, 2019

For adding on second levels, is there a way to lock them on or do they just sit there, trying to find a way to avoid gluing down tall buildings
- Sam Campbell (verified owner) – November 14, 2019
  
  We’re releasing variants with top locking pins soon.
izak.s.kruger – November 30, 2019

The rounded roof tiles, are there any roof packs available that contain them, and not the square roof tiles (as per the slate or Clorehaven Roof sets)?
- Sam Campbell (verified owner) – December 2, 2019
  
  There is a modular roof pack with round roof parts here.
  https://www.printablescenery.com/product/modular-shingle-roof/
Shaun Kantor (verified owner) – December 10, 2019

Is there a trick to printing the secret door? I have upped the infill to 30 % and it still snaps when I try and slide the parts together. Do I need to print it solid?
- Sam Campbell (verified owner) – December 11, 2019
  
  It may be cracking along the print striation line. You may need to file and sand to make sure you get a neat comfortable fit before attempting to join the pieces.
Christopher.Loddo88 (verified owner) – February 22, 2020

one the Library Tudor Balcony Entrance how do you clip in the 2 floor sections on the 3rd level? it being 180 degrees of the turret I can’t clip in both, I just glued mine as they aren’t ever gonna be used separate but the clips don’t work well there.
- Nicholas Jebson (verified owner) – February 24, 2020
  
  Hey Christopher. It can hold with one clip near the door and then anchored to other floor sections that are anchored into the walls, but you are right that it is an awkward one to set. Sometimes gluing in your preferred floor is the best call to get a strong hold.
beleskye (verified owner) – April 11, 2020

Are there any plans to use the footprint of the “LIbrary Tutor Balcony Entrance” on other sets? I could really use one (minus balconies) to build a tower on the top of my castle.

I guess what I am asking for is a S wall that is curved.
- Sam Campbell (verified owner) – April 14, 2020
  
  We’re looking at developing an outside floor to fit around the G wall.
CristianSCooney (verified owner) – April 23, 2020

Any update on the 11/14/19 “We’re releasing variants with top locking pins soon”? The pins for the Chapel are great. Specifically need the pins and slot for the half roof.

Thanks.
- Sam Campbell (verified owner) – April 23, 2020
  
  Thanks, we are set to upgrade this soon.
mhj77 (verified owner) – May 1, 2020

When changing the assembly guide – please don’t forget those clipclaps 🙂
tamarack928 (verified owner) – July 25, 2020

cannot print these secret walls. They break every single time no matter what I do. I’ve increased infill, I’ve sanded, I’ve printed with different filaments, I have 8 broken bookshelves sitting here. What’s the secret?
- Sam Campbell (verified owner) – July 27, 2020
  
  Can you please email [email protected] and attach some photos of the failed prints.
GlitchTech Science (verified owner) – August 11, 2020

When slicing/printing “A-Tudor-Balcony-Door-v1.0” I noticed that the top of the door is split slightly. It doesn’t cause any issues when finished, just makes the printer do some extra movement printing two perimeters instead of one.
icristian.hrimiuc (verified owner) – September 18, 2020

The “F-SpiralStair-RusticWoodandStone-Railing-v1.0” and “F-SpiralStair-RusticWoodandStone-v1.0” are slightly taller that the standard 50.8 mm height of the walls. I fixed this by scaling them down a bit so that they are the same height, but an update should be made to the models in this pack as well, so that other do not encounter the same issue.
- Sam Campbell (verified owner) – September 18, 2020
  
  Thanks for that, we’ll get this updated.
ernesto.pini16 (verified owner) – November 22, 2020

I think the balcony door should be mirrored, mine doesnt close properly
- Nicholas Jebson (verified owner) – November 23, 2020
  
  It is very easy to mirror an STL file, you can find out how to do it here: mirroring your models
Shaun Kantor (verified owner) – December 1, 2020

Is there any chance of a Secret Bookcase Wall with a Tudor backing, or even just a plain Tudor Secret Wall at some point?
- Nicholas Jebson (verified owner) – December 1, 2020
  
  We can certainly look to add those in at some point, We will add them to the updates list