My Account 
Description
Thieves of the guild were adept at climbing the roofs of Clorehaven, making their way across shingle roofs unnoticed and and hiding behind numerous chimneys to case their targets.
Updates:
- 19 February 2020 (version 1.1) A-Apex-Chimney and S-Apex-Chimney added.
- 22 April 2020 (version 1.2) Boarded up E-Roof tiles added.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
Apex Reference
Chimney Reference 
Half Inch Deep Chimney Roof End Reference
Inch Deep Chimney Roof End Reference
Nadir Reference
Risers Reference
Half Inch Deep Roof Ends Reference
Inch Deep Roof Ends Reference
Boarded Up Reference
josh.briffett (verified owner) –
I expect I’m missing something very basic here but in both roof end packs there only seems to be right side sections. The photo’s above show ends for the left but I am unable to find them. Am I missing something or are they not added yet?
Sam Campbell (verified owner) –
You will need to mirror right side pieces on the build plate before printing.
Cratesbane (verified owner) –
The Slate Roof components work interestingly with the modular roof components right up until they hit the A walls. Is there any chance for Modular Roof Half Inch Deep Roof Ends that would match Slate Roof’s angle/profile?
Nicholas Jebson (verified owner) –
Hey Cratesbane. Thanks for the suggestion, we will add it to the list of ideas for future development.
rjyingling –
I am only seeing waddle a daub roof ends. Are there any options for all wood roof ends similar to what you would find in the SimpleHouse-Roof?
Nicholas Jebson (verified owner) –
As they were made to tie in with the Tudor sets we did only do wattle and daub ends. We can add it the ideas for future development.
James (verified owner) –
The E low boarded up roof seems to have a different base the the regular E low roof, as in its missing the groove at the front to allow it to fit on locking pins. Can that be updated?
Mike –
Hi James,
Thanks for bringing this to our attention. I’ll add it to the list for possible model updates.
Chris Emmett (verified owner) –
Any chance we could get an apex where all four sides slop up into a point?
Similar to I-Roof-High-1 but with the fourth side matching the other three?
so it can slot into the O position below:
ESE
SOS
ESE
E = E-Corner-Roof-Convex-Low
S = S-Roof-Narrow-Low
Jo Boorer (verified owner) –
Thanks for your suggestion I will add it to the list of requested updates.