Name: Manor Inn Expansion
Brand: Dungeons and Dragons
Availability: InStock

Description

After exploring the vast dungeons beneath the city the exhausted party settled at the Manor Inn for some hot food and rest. Rumor had it that it was once haunted and that a band of adventurers restored it after finding a treasure hoard deep beneath the city. Little can be seen of it’s former ruin, which has been repaired and painted. The floating steins of ale and plates of steaming food looks somewhat weird at first. It seems the adventures did not rid the inn of it’s former occupants but persuaded them into service. The patrons don’t seem to mind though as there is a lively crowd in good spirits.

To build the Manor Inn as pictured you will require pieces from other sets including Rustic Stone Floors, Rustic Stone and Wood Stairs, Schist Walls, Tudor Walls, Modular Shingle Roof, Schist Street Support, Wooden Balcony Walls, Clip Caps, Rustic Wooden and Rustic Stone floors. To assemble the Manor Inn and other buildings of Clorehaven you can download the Assembly Guides.

Updates:

30 March 2020 (version 1.1) E-StoneFloor-w-Wooden-Hatch had texture removed from underneath.
19 May 2022 (version 1.2) Doors added to the Schist and Tudor Door and Column Mashup folders.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Locking Pins Reference

Schist Door Column Mashups Reference

Tudor Door Column Mashups Reference

Additional information

Infill	10%
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	Prints without Supports

20 questions for Manor Inn Expansion

Tom Tumbusch (verified owner) – February 28, 2020

Would it be possible to have a blank version of the hanging sign added to this set? Thanks!
- Sam Campbell (verified owner) – February 28, 2020
  
  There is a selection of signs including a blank one in https://www.printablescenery.com/product/hanging-signs/
mowskiller (verified owner) – February 28, 2020

Did you happen to keep track of how much filament you used in making this Inn? I am just asking to know how much I can plan on getting. Thanks.
- Sam Campbell (verified owner) – March 2, 2020
  
  We did not keep track of how much filament was used in this build.
paso_fabri (verified owner) – February 29, 2020

E-StoneFloor-w-Wooden-Hatch-v1.0
I think it has an error ….. it does not rest on the print bed
- Nicholas Jebson – February 29, 2020
  
  Hey Passo, I just put it in Meshmixer and see that the bottom hatch lip sits just below the level. We will get it fixed on monday.
Cratesbane (verified owner) – March 8, 2020

Bit of a headache I understand, but is there any chance to get those Door Column mashups in an AS variant?
- Sam Campbell (verified owner) – March 9, 2020
  
  Yes we can get this done soon.
Erik Corona (verified owner) – May 24, 2020

In general, any instructions on how to assemble…

A-SchistDoor-v0.1
A-Door-SchistDoor-v0.1
A-SchistDoor-Beam-v0.1

I stuck filament into the holes to be used as a hinge but I can’t figure out why this is in 3 pieces instead of 2. Any reason why the top part was meant to be printed separately? I want to make sure I’m putting it together correctly.
- Sam Campbell (verified owner) – May 25, 2020
  
  The beam was designed to be printed separately and neatly without stringing.
Erik Corona (verified owner) – May 25, 2020

How do you connect corners? Trying to figure out how to connect walls using this column: L-Column-Schlist-v1.0.stl. Should 4 clips (2 coming from each wall in the corner) be used or a total of 2 clips (1 coming from each wall in the corner)?
- Sam Campbell (verified owner) – May 25, 2020
  
  Only 2 clips can go into a column, one high and one low. The Extra ports are there for if you want to switch.
tamarack928 (verified owner) – June 30, 2020

i must be blind but for level 1 part 2 I cannot find AS-Schist-fireplace-v1.1 (i see a 1.0), or S-full-schist-wood-stair-v1.0. It says they are in the manor inn expansion but I can’t find them in there or in the schist files. Thanks.
- Sam Campbell (verified owner) – June 30, 2020
  
  Fire place is in the Schist Walls and stairs are in the Rustic Stone and Wood Stairs sets.
  
  https://www.printablescenery.com/product/schist-walls/
  https://www.printablescenery.com/product/rustic-stone-and-wood-stairs/
tamarack928 (verified owner) – July 1, 2020

Thank you Sam. I guess i had an outdated version of the schist walls and was confused by “full stair” which makes sense now. Appreciate it!
IanSomeRandomNumber (verified owner) – August 27, 2020

Are there any plans to add plain wall ZA-LP tiles?
In particular a ZA-LP-Wall-Schist would be really helpful to me!
Also, purely for the sake of completeness, there’s no corresponding ZA-LP-Window-Schist-w-shutters-open.

Thanks!
- Sam Campbell (verified owner) – August 31, 2020
  
  Thanks for the great suggestion, we’ll see if we can add these in at some point. I’ve added them to ideas for development.
kenneth.holdorf (verified owner) – June 23, 2021

I’m preparing to print this, and in Basement I see a reference to A-Wall-Schist-v1.0, but I can’t find this file anywhere. Is it the same as A-Wall-Schist-v0.2, which I do have?

Also, DS-SchistDoubleDoorway-v1.0 in level 1-1 doesn’t seem to have a beam, at least not in the instructions?
- Mike – June 23, 2021
  
  Hi Kenneth!
  
  Thanks for bringing this to our attention! It is the same as A-Wall-Schist-v0.2, which is the most current version of that wall.
  And thank you for pointing out the missing beam in the instructions! I will add that, as it should be in there to cap the doorway.
  Its a big set but well worth it! Can’t wait to see how you go
  
  Happy Printing!
kenneth.holdorf (verified owner) – July 20, 2021

Still working on printing this, and I think there has to be something wrong with the diagram of level 2. Up by the “round” room in the upper right, it says to use #12 (AS-Floor-RusticWooden-v1.0) vertically and #13 (IA-Floor-RusticWooden-v1.0) horizontally , but the sizes don’t match and neither does the amount needed for these two in the table (it says to print 6 of #12 and 3 of #13, and these are already used elsewhere). Which floors should I be using here? Thanks in advance!
- Mike – July 21, 2021
  
  Hi Kenneth!
  
  Thanks so much for pointing this out. We’ve looked at the physical model and updated the assembly guide to have the correct floor pieces for level 2.
  If you come across any other discrepancies please get in touch!
Michael Potter (verified owner) – September 23, 2021

Where is the build plan for the famous manor? I don’t see it in the forum thread or the download?
extinctfigment – October 17, 2021

Is there an option to purchase a complete and painted model of this? I don’t have a 3D printer and my art skills are limited to marginally understandable stick figures, but i LOVE this build. My players look to be setting up TrollSkull Manor as a base of operations that will last for years, so it would be worth the investment for something this gorgeous.
kenneth.holdorf (verified owner) – October 18, 2021

I took a break printing this, but I’m back at it. I’m pleased with the way it’s turning out, but I must say it’s a bit frustrating that I keep running into errors in the assembly instruction. For Roof A, 15 is twice as tall as it should be, and 16 is one “layer” too tall as well. In addition, 16 is mirrored so that the slots are facing out, so is 17. Also, four #14 are needed, the table lists only 3.

I’d appreciate it if someone could give me a corrected version of this level so I can finish this part of the roof!
- Mike (Printable Scenery) – October 18, 2021
  
  Hi Kenneth,
  
  Thanks for letting us know. Its quite the build! I’ll correct those errors in the instructions and have a look for any potential other errors. If in doubt, try building the section in Terrain Tinker first, you could even combine pieces in there to make the whole thing easier to assemble too!
  Soon there will be the function to share designs which will make large kits like this a breeze to do!
kenneth.holdorf (verified owner) – October 18, 2021

Thanks for the updated pdf file! I thought I would try building Roof B in Terrain tinker, but hit a few snags early on – I couldn’t find S-Roof-Wide-Low, and I can’t find any risers. Instead of a riser I figured I would try putting a floor there instead and put the roof tile on top of it, but I can’t find a way to do that, or how to raise the roof one floor’s height off the plate by itself.

I will definitely be trying Terrain Tinker in the future for builds without risers, though!
nathan.anderson311 (verified owner) – November 27, 2021

You might want to add in the description that you need the Schist Street Support, Wooden Balcony Walls, and Clip Caps. It is kind of frustrating getting all the necessary products that are listed only to find out that I have to buy more.
- Mike (Printable Scenery) – November 30, 2021
  
  Hi Nathan,
  
  Thanks for your feedback, those products have been added to the list of necessary products to assemble the Manor Inn.
Doc Webb (verified owner) – May 13, 2022

Should I be using different doors for the column/doorway mashups? The conventional doors don’t seem to be wide enough — they swing both ways through the door way.
- Jo Boorer (verified owner) – May 18, 2022
  
  Hi Doc
  The doors for the column/doorway are included in the Schist Walls and Tudor walls. The door included in this expansion pack is for the ZA-LP-Schist-Entrance.
redbjork (verified owner) – January 10, 2023

Hi
Instructions are missing on level 1 part 1
Number 12, 1x D-Beam-SchistDoubleDoorway-v1.0

The top part of the double door.
- Jo Boorer (verified owner) – January 10, 2023
  
  Thanks for pointing this out. This guide has now been updated.
redbjork (verified owner) – February 10, 2023

Instructions on Floor 2-3 states that you should use
ZA-LP-Window-Tudor
However on the picture it´s a use between
ZA-LP-Window-Tudor-w-Shutters-Open-v1.0
ZA-LP-Window-Tudor-w-Shutters-Closed-v1.0
(same on floor 1 but with stone)

would be nice if it said to use these options as see fit. Would be even nicer if you could open and close the shutters so you did not have to chose. 🙂

Still printing 🙂

If I remember I will weigh the model when done.
- Jo Boorer (verified owner) – February 10, 2023
  
  I have updated the Assembly guide so customers know they have the choice to use either with shutter open or closed.
  I have also added your suggestion of shutters that can open and close to our list of possible future updates.
redbjork (verified owner) – March 15, 2023

Some errors in the instructions

Level 1 Part1
It lists that you should print 13# 2x IA-SchistSupport-2-v1.0. However, when you add Floor 2 they stick out far to long

It should be 2x IA-SchistSupport-1-v1.0.stl

Level 2:
In corridor bellow tower you need to add a BA-AS-Floor-RusticWooden-v1.0, and to the wall to the left you need to add a I-Column-Tudor-v1.1. Otherwise it won´t fit.

Level3
tiles labeled 25 (A-RoofEnd-Sloped-Low-v1.0), one is missing and to the left of the tower and should be mirrored. The one to the right that is closest to the tower should also be mirrored.

On the drawing a tile is missing a number

Level4:
A-Door-Tudor-IO-2-v1.0
A-Door-Tudor-LO-2-v1.0
Are missing doors

Why are we using a AS-TudorFireplace-v1.1? It´s open to the stairways. Make no sense, should be A-TudorFireplace-v1.1.

Number 1 labeled: BA-Balcony-Cnr-wSupport-MIR-v1.0 is incorrect, it should be BA-Balcony-Cnr-wSupport-v1.0.stl (not mirrored).

Two AS-Window-Tudor-v1.0.stl is labeled “28” in the drawing, however it´s not listed to be printed

Roof A
#21 is floating 🙁

Roof B
#16 cant be connected to anything very unsatisfying. I will glue them in place, wish for better solution.

Last, you should link to this as it´s very helpful in figuring out how it is put together.
https://youtu.be/QcHF41HVZ24
https://youtu.be/Rv1lj4q68NQ

Would also help if you posted high resolution images.
- Jo Boorer (verified owner) – March 15, 2023
  
  Thanks for your feedback. It is unclear which tiles and places you are referring to. Can you please send me pictures of these areas of issue to [email protected] so that we can make the right corrections.