Cart (1)

Product Categories+

Guardhouse Walls

$9.95

Any sales taxes will be calculated in the checkout.

The Guardhouse Walls pack contains various tiles that can be clipped together. This pack is part of the Clorehaven City building line of building tiles and is designed to be used with the Schist walls and Rustic Stone floors. This set is compatible with all other OpenLOCK products.

To build the Guardhouse as pictured you will require pieces from other sets including Rustic Stone FloorsRustic Stone and Wood StairsSchist WallsTudor Walls, Schist Low WallsHanging Signs and the Clorehaven Roofs sets. To assemble the Guardhouse and other buildings of Clorehaven you can download the Assembly Guides.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

A small piece of filament or wire can be used as a hinge pin to attach the door to the doorway.

 

This product is part of the Clorehaven Add-On. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

Tough iron grates and wall manacles keep the criminals in check in the City of Clorehaven.

Updates:

  • 5 July 2021 (version 1.1) A-Chain Bolt Wall has had overhang issue fixed to prevent stringing.

Notes:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.

 

 

Additional information

Infill

10%

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

Prints without Supports

2 questions for Guardhouse Walls

  1. mkares2005 (verified owner)

    Where are the Schist Entrance and Metal Hinged Door located? They don’t seem to be a part of any pack.

    • Jo Boorer

      Schist Walls now contains the updated zip file with the Guardhouse doors and doorway.

  2. James Jones (verified owner)

    Hi there! So I printed these out, and on the ‘A’ piece with the rail (but no manacles or skeleton), there was quite significant failure at the bottom of the rail. At least two or three layers appear to have just spiralled off. While it wasn’t fatal to the print, I suggest you look at this section and make the ‘build up’ to the rail more gradual. Or something.

    I printed the A piece with the manacles / manacles and skeleton totally fine, so it appears to be just the version with rail only.

    • Nicholas Jebson (verified owner)

      Cheers for the heads up James, we will look into it and see how we can best improve it.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2024 Printable Scenery. Website by Vienna & Bailey