$7.95
The Heavy Stone Torch wall is a multi-part wall that contains a sleeve for an LED light system to be inserted and separate flame pieces. This set is designed to be used with the Rampage Heavy Walls and is compatible with all other OpenLOCK products.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
There is a version of the sleeve with printer supports.
You can use this guide for printing and fitting the Torch Walls with a miniature LED lighting system.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Throughout the Castle, heavy stone torches are dotted around the halls and corridors to keep the darkness at bay. The serfs had a much easier time getting around, but the thieves would find sneaking in a lot more challenging. That was, unless of course the serf in charge of lighting them disappeared…
Notes:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| Infill | 100% for resin printing, 10% |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
In this article, we’ll cover three different OpenLOCK doors and how to build them. The three types are the sliding door, the hinged door, and the hinged door with the stone cap. Each has its own advantages, but all go together easily. Sliding Door These kinds of OpenLOCK doors are the easiest; all you need… Read more
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more
In this article, we’ll show you how we go about removing the small supports that are printed on all OpenLOCK model ports. These small supports are printed to support the overhangs in the OpenLOCK port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. For this, we recommend using… Read more
In preparing the torch walls you will need to print each piece separately. The torch flames are printed in yellow translucent filament . The Sleeve may need to be sanded to fit cleanly depending on how fine a resolution you print at. To light the torch walls we investigated a number of different miniature LED… Read more
You must be logged in to post a question.
Andy Comber (verified owner) –
I have a few questions on the torch walls. I’ve been eagerly waiting for these and they look great by the way but my questions are as follows:-
1) what size LEDs are required to fit the torch sections?
2) will there be a diagram showing how the LEDs fit in presumably to hold a battery
3) is there any kind of switch system to turn off or is it a case of taking out the battery when not in use?
Thanks in advance
Andy
Sam Campbell (verified owner) –
I’ve updated each of the Torch Walls with a guide
Paul Feeney (verified owner) –
Thanks for these, I am so excited to add these to my printed collection.
Nicholas Jebson –
No Worries Paul, always happy to deliver awesome products like these to you guys!
Tony Crawford (verified owner) –
Hi guys, I’ve got a question about this product and the one for the crypts as well. In your kickstarter for Clorehaven and the Goblin Grotto, it said you were able to get an add on for a “Dungeon Booster”. In this dungeon booster were three walls, two of them called Crypt Torch Walls, and one of them called Heavy Stone Torch Wall. One of the crypt torch wall had a brasier on the wall, while the other crypt torch wall and the Heavy Stone Torch Wall had an alcove with a skull and a brasier.
I have noticed that these files are not in the now downloadable files for the Heavy Stone Torch Wall or the Crypt Torch Wall. But I still see them available for the Architects of Destruction’s version of the Rampage Dungeon system. You can see a large picture of it right on their kickstarter page.
I’m wondering why Architects of Destruction has them but Printable Scenery does not.
I would really love to have those files to be able to print out!
Mike (Printable Scenery) –
Hi Tony,
Those torch walls in the end were only developed for plastic injection molding for AoD and not as STLs. I’ll add your request to our list of potential model updates when we look at the Dungeon Booster sets again in the future, they might even end up on Terrain Tinker at some point.
Tony Crawford (verified owner) –
Ok, Thanks Mike. I appreciate the info.