Name: Elven Groves
Brand: Age of Sigmar
Availability: InStock
Rating: 5.00 (1 reviews)

Description

The ruins of Ithillia lie deep in the Gloomwood, a labyrinthine warren of overgrown stone and wood. With the kind of patience only found in nature, the ancient forest seeks slowly to reclaim the ruins the elves have long forgotten.

Updates:

30 May 2019 (version 1.1) ElvenScatterGroves-50mm-Block and ElvenScatterGroves-75mm-Scatter-Block have had adjustments made to make the base level.

Notes for Elven Groves:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	100% for resin printing, 10%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Painting Guide: Library of Ithillia

Posted on April 30, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint The Library of Ithillia The model was initially primed with Army Painter Leather Brown. Stone This is the scheme used for the bricks and stone. Heavy dry-brush: Army Painter Arid Earth. Final highlight: Army Painter Skeleton Bone. Trim This is the scheme used on… Read more

OpenLOCK: Elven Groves scatter terrain

Posted on November 26, 2018July 23, 2025 by Matt

This is a video showing some different ways to configure the Elven Groves OpenLOCK scatter terrain. There are 16 pieces in this set. Included are 5 corner end pieces, as well as 1″, 2″, 4″ and 6″ length walls, and a 3″ doorway that grant a wide variety of wall configurations. There are also… Read more

8 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

1 question for Elven Groves

jeff.mancini (verified owner) – December 31, 2018

Can all of these models be printed without supports?
- Sam Campbell (verified owner) – December 31, 2018
  
  Yes, these models print without supports.
swhite747325 (verified owner) – January 1, 2019

I’m looking at ElvenScatterGroves-Ruin-Wall-150mm in a slicer and there are all sorts of places that would start in mid-air without support. Is that just considered acceptable loss or should some of these models really use supports?
- Matt Barker – January 6, 2019
  
  They will print fine without supports. there is a small amount of stringing in some places but nothing noticeable
scottcannaday (verified owner) – January 19, 2019

Any chance we could get a 50mm wall without a tree? Similar to the Connector L… this would allow a quicker turn around from print to paint time as painting the tree is time consuming.
- Matt Barker – January 22, 2019
  
  We are making a big expansion for the elven walls in our next Kickstarter as they have been very popular. I’ll make sure we also include some treeless versions.
treykane – July 26, 2019

Is there still a plan to expand this set?

I’ve recently become very taken with the idea of not using tiles at all in most cases and instead just using a gridded mat, or just nice texture. A variety of freestanding walls just seems like a simpler more effective use of the printer, and terrain on the gaming table.
- Sam Campbell (verified owner) – July 29, 2019
  
  We have no plans to expand this set of Elven Groves, but if you have any suggestions we’d be happy to hear them. We are releasing similar wall sets in different themes though.
tripoc82 (verified owner) – September 8, 2019

I was thinking once I held the 75mm scatter block, in my hand after printing to see how it came out. Wouldn’t it be good if the stairs and banister, had seperate model files. So I could add them to things here and there. Even to things I might make by hand etc to kind of tie things together.
- Sam Campbell (verified owner) – September 9, 2019
  
  A good suggestion, we’ll add it into the ideas for development.
cameron.rivenbark – February 14, 2020

Printing the Scatter Groves Connector “O” has been about 40% successfull. Always gets knocked off, expecially when grouped together. None of the other files seem to.

You may want to post an update on the page to print with a BRIM or SKIRT
- Nicholas Jebson – February 14, 2020
  
  Hey Cameron, this sounds more like an adhesion problem more than anything else, but a raft or brim would help a little bit.
shane.williamson032 (verified owner) – July 16, 2021

Fantastic set. Love the design and would love to see more. I do wish there were more wall endings that just the connector-0 piece for a bit more variety. Confused whether the set will be expanded or not. In the Q&As in response to a question on Matt Barker said there was a big expansion planned for the elven walls set in the next kickstarter due to their popularity, but then 6 months later in response to a different question Sam Campbell said there were no plans to expand the set.
- Mike – July 19, 2021
  
  Hi Shane,
  
  Thanks for your feedback! We have a list of model suggestions and updates that we work through to improve our models. I’ll add your suggestion to the update list.
  More Elven terrain is still a potential for a future update as they are very popular, but we can’t say when it will happen. You’ll be sure to see it when it does!
Rated 5 out of 5

lrsvilr (verified owner) – December 12, 2022

Absolutely love this set. I’ve been printing it for a week straight and I’m about to start priming and painting it but I did want to ask if you could please share your painting scheme for this set. Would really appreciate it.
Cheers!
- Jo Boorer (verified owner) – December 12, 2022
  
  I am unable to locate the exact paint guide for these but know it was primed in Leather brown and would use some of the paints listed on the Library of Ithillia. https://www.printablescenery.com/2019/04/30/painting-guide-library-of-ithillia/