Cart (0)

Product Categories+

Library of Ithillia


Any sales taxes will be calculated in the checkout.

The Library of Ithillia is a fantasy styled building that can be used for role playing or table top war games of a fantasy setting. Featuring hinged doors, multilevel, removable roofs and floors, it has plenty of room and allows for excellent miniature placement. It prints without supports as separate levels. There is a no-shelves version of the first floor and small printer versions.

This product is part of the Complete Elves. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


A beacon of knowledge, the library stands against the dark times where demons spread lies and ignorance throughout the land.



  • 7 January 2019 (version 1.1) Top locking pins added and no-shelves version of first floor added.
  • 8 January 2019 (version 1.2) 2nd floor and 2nd floor small printer parts re-cut. Roof small printer parts re-cut. Additional first floor versions added with steps cut.
  • 30 May 2019 (version 1.3) 2nd Floor and 2nd Floor small printer parts have supports added in windows.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • To make the operational hinge please use a small piece of unused filament. Please refer to this video.
  • Product measurements can be found in the image gallery.

Library of Ithillia reference

Library of Ithillia small printer reference

Library of Ithillia Steps Removed reference

Library of Ithillia no shelves reference

Library of Ithillia no shelves small printer reference

Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Requires supports on some files

10 questions for Library of Ithillia

  1. elmortero (verified owner)

    There are inset squares that look like pegs could go in them on the underside of the 2nd floor pieces. Is there something that is supposed to glue in to potentially make it easier for the 2nd floor section to fit?

    • Matt Barker

      The pins on the top of the first floor align with the holes on the bottom of the second floor. They keep the roof from sliding off.

  2. Dave Tuite (verified owner)

    Is there going to be a painting guide added soon?

    • Sam Campbell (verified owner)

      We’ll see if we can get a painting guide up soon for this.

  3. Patrick Fraley (verified owner)

    any advice on getting the supports off the railing on the second level?

    • Sam Campbell (verified owner)

      This is being worked on soon.

  4. Patrick Fraley (verified owner)

    I have completed the printing but I have noticed that the bottom level doesn’t include the doors as does the one piece print includes. Is there a separate file for the doors?

    • Sam Campbell (verified owner)

      Yes, it is in the zip and it is called “Ithillian-Library-Doors-v1.0”. You can re-download the product if it’s missing.

  5. Voodoo (verified owner)

    On the Second floor of the library the whole top quarter inch of the structure shifted forward and rotated a quarter inch like the lid of a jar. I was just wondering if anyone has experienced anything like this?
    I have a Prusa MK3s that is dialed in. I didn’t have any failures before or after and I have been printing taller structures. (the library, tower aerternus, sorcer’s tower etc). I can send pictures if you would like.

    • Sam Campbell (verified owner)

      send to [email protected] and we will have a look at them.

  6. Voodoo (verified owner)

    Edit to my October 3rd post. Without any readjustments to my printer I reprinted the second floor of the library, no supports, 20% infill, 0.2 and it came out perfect. I will send pictures regardless. Really not sure how that happened with the first print.

  7. Fabrizio Guzman (verified owner)

    Hi, can you confirm what files need supports?


    • Mike

      Hi Fabrizio,

      There are a few small curls on the top of the second level that some customers have suggested adding small supports to.
      Ours was printed without supports but if in doubt, add them on.
      Thanks 🙂

  8. Jez (verified owner)

    Curious as to where Ithilia is? i.e. Is it a published campaign setting? Or is it just a nod to Ithilien, a region of Middle-Earth?

    • Jo Boorer (verified owner)

      Ithilia is part of a world that Matt Barker and Johnny Fraser-Allen are currently working on.

  9. Jeremy (verified owner)

    BTW – just an FYI, not sure the spelling, but it’s spelled differently on this page compared to the “Lost Library of Ithilia”, i.e. you’ve got a double-L on this spelling.

    • Jo Boorer (verified owner)

      Thanks for pointing out this out I will make the corrections.

  10. closeencounter07

    Someone is selling 3D prints of your Library Of Ithillia model on Etsy in violation of the Printable Scenery terms and conditions. You should report this to Etsy. Here is the link:

    • Jo Boorer (verified owner)

      Thanks for reporting this to us. I have notified Etsy

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey