My Account 
Description
The Chieftan keeps a steady supply of warriors trained and ready to fight as tensions rise in Hagglethorn Hollow. When the rebellion starts, the Warriors trained in the Barracks will be at its core.
The Hagglethorn Barracks comes with three versions included in the download:
- A cut, supported version for printers with a print bed size of 200mmX200mm (recommended)
- A folder labeled “Small Printer” with pieces cut for printers with a bed size of 120mmX120mm
- A folder titled “Without Supports” containing an uncut, unsupported version for larger printers and for scaling-down purposes
Updates:
- 5 January 2022 (version 1.6) locking pins are now the correct size.
- 18 October 2023 (version 1.7) Locking pin cavities added to the without support version of the roof.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack
- Reference for small printer cuts is included in the zip
- Product measurements can be found in the image gallery
- Copyright Printable Scenery under license from Tabletop Troubadour Games
- An unsupported and uncut version is provided for scaling and resin printing purposes
- First Published version 1.5
d.scully (verified owner) –
Hi,
The “without supports” version of the Roof is too high to print on a Prusa MK3S+. Is there a non-support version of the split models?
Regards.
Mike (verified owner) –
Hi,
The unsupported version of the model is there for the purpose of scaling down for smaller printing and resin printers. We recommend printing the supported, cut version as it will produce a better result for FDM printing.
Cris (verified owner) –
The cut version of the supported middle section has some wafer thin sections at the top. At the recommended 0.2 layer height, these are single layer sections in mid air. Could you take a look at this please?
Could you also provide a supported version of the complete top half for printing on printers large enough to print these (e.g. Ender 3)?
Thanks.
Mike (verified owner) –
Hi Cris,
Thanks for bringing this to our attention. We will provide an updated version in the next few days.
For the complete top half, it has been provided for larger printers (such as the Ender 5 Plus) and for those wanting to scale it down.
You will find however the seam line on the cut version has been chosen so it is barely visible on the finished model.
Cris (verified owner) –
Is there a reason the “Without Supports” files do not have the locking pins? I printed two of the tower bases (I had already printed the tower and the file was on the printer) and found that the top half of the Barracks does not have the holes for locking in to the base. Unfortunately, I only noticed after printing.
Mike (verified owner) –
Hi Cris,
The main purpose of the complete models is for scaling down purposes which wouldn’t traditionally need locking pins. Thanks to feedback, we are updating the unsupported versions to have locking pins included and should be out very soon.
otisaardvark (verified owner) –
The ZIP file for the barracks does not appear to contain an unsupported version of the file Hagglethorn-Barracks-A-Supports-v1.4. Any chance this could be added to the ZIP file?
Mike (verified owner) –
Hi Otisaardvark,
The folder labeled Without Supports contains an uncut, unsupported version for larger printers and for scaling down purposes. We recommend you use the supported version if you are printing in FDM and want to print the piece with the roof cut.
Nutsaq (verified owner) –
Tower Base is not interchangeable with both Barracks and Tower. This issue is because of different Pin Sizes… Already printed everything only to realize that i need another Tower Base :/
Everything else is great and im Loving the Models so far
Nicholas Jebson (verified owner) –
Hey Nutsaq, We are looking to get this updated ASAP, as the Barracks definitely should have the larger pins.
azaragozakc85 (verified owner) –
Has anyone printed this successfully? Me and a few other friends have had this print fail everytime about halfway up the middle section. I use an ender 5 and my friends have an ender 3s. The base and top print fine. This is the only hagglethorn file I’ve had trouble with.
Matt Barker –
HI can you let me know what happened, could you send some images to [email protected]
lelandlong (verified owner) –
The v1.6 unsupported base prints with lock pins, but the unsupported Roof does NOT have holes for the pins. Can this be updated so that I can re-print the roof and not have it loosely sit on top of the base pins? Please and thank you.
Jo Boorer (verified owner) –
Thanks for pointing this out to us. I have sent this to a modeler to fix.