Description
The townsfolk of Clorehaven value well made furniture that stands the test of time and can survive a good bar fight.
Updates:
- 27 September 2019 (version 1.1) LongTable-2-Inch-Base & Top readjusted to make level.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
Nikolaj_Uhrenholt (verified owner) –
Long Table 2 inch top is unprintable (at least in Prusa-Slicer) it has a one and a half empty layer.
Sam Campbell (verified owner) –
We will get this updated. You will receive a notification in your email once this has been updated.
mcguffees (verified owner) –
The chair bottom is humongous. I imported it into 3d Builder and it is about 200mm by 200mm. The chair top is about 10mm by 10mm.
Sam Campbell (verified owner) –
We’ve rechecked the Chair-Base-v1.0.stl file and it is only 12.2820×12.5080×7.0320mm. You may need to re download and re-import it. Also make sure 3d Builder is not re-scaling it on import.
mcguffees (verified owner) –
Thanks Sam. I re-downloaded and the problem still persists in 3D Builder but was the correct size in Cura and 3d Viewer. No problem with any of the other files in 3D Builder. Something weird going on but not causing a print issue so not worth worrying about.
Anthony edwards –
do these need to be glued together?
Mike –
Hi Anthony,
They don’t strictly need glue but we strongly recommend it so the furniture doesn’t get knocked about when being used in games. Simple super glue will do the trick for FDM or Resin printing 🙂
s.a.deter (verified owner) –
Is the Thin Table Base supposed to be that short? It’s about the same height as the bench legs, and it’s not even close to the height of the other table bases.
Jo Boorer (verified owner) –
In the photos this is displayed as a side table that sits under the windows