Name: Simple Furniture
Brand: Dungeons and Dragons
Availability: InStock

Simple Furniture

$5.95

Any sales taxes will be calculated in the checkout.

This set contains twenty two pieces including tables, chairs, benches and beds. These can be used for populating scenes in taverns, houses or dungeons in tabletop skirmish and role-playing games. This set is designed to print on FDM printers at 0.1 resolution.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The townsfolk of Clorehaven value well made furniture that stands the test of time and can survive a good bar fight.

Updates:

27 September 2019 (version 1.1) LongTable-2-Inch-Base & Top readjusted to make level.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	100% for resin printing, 10%
Layer Height	0.05 high quality on resin printers, .1 high quality
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Nikolaj_Uhrenholt (verified owner) – September 23, 2019

Long Table 2 inch top is unprintable (at least in Prusa-Slicer) it has a one and a half empty layer.
- Sam Campbell (verified owner) – September 26, 2019
  
  We will get this updated. You will receive a notification in your email once this has been updated.
mcguffees (verified owner) – October 20, 2020

The chair bottom is humongous. I imported it into 3d Builder and it is about 200mm by 200mm. The chair top is about 10mm by 10mm.
- Sam Campbell (verified owner) – October 21, 2020
  
  We’ve rechecked the Chair-Base-v1.0.stl file and it is only 12.2820×12.5080×7.0320mm. You may need to re download and re-import it. Also make sure 3d Builder is not re-scaling it on import.
mcguffees (verified owner) – October 24, 2020

Thanks Sam. I re-downloaded and the problem still persists in 3D Builder but was the correct size in Cura and 3d Viewer. No problem with any of the other files in 3D Builder. Something weird going on but not causing a print issue so not worth worrying about.
Anthony edwards – May 5, 2021

do these need to be glued together?
- Mike – May 6, 2021
  
  Hi Anthony,
  
  They don’t strictly need glue but we strongly recommend it so the furniture doesn’t get knocked about when being used in games. Simple super glue will do the trick for FDM or Resin printing 🙂
s.a.deter (verified owner) – April 27, 2023

Is the Thin Table Base supposed to be that short? It’s about the same height as the bench legs, and it’s not even close to the height of the other table bases.
- Jo Boorer (verified owner) – April 27, 2023
  
  In the photos this is displayed as a side table that sits under the windows