Hagglethorn Tavern – Hagglethorn Hollow

Name: Hagglethorn Tavern - Hagglethorn Hollow
Brand: Age of Sigmar
Availability: InStock

$19.95

Any sales taxes will be calculated in the checkout.

The Hagglethorn Tavern is a massive 3-part tiled building scanned from the hand-sculpted model by Johnny Frazer-Allen, it then has been adapted and optimized into a 3D printable STL file. The Tavern shares its Base and Dungeon sections with the Hagglethorn Longhouse, Ruined Tavern and Ruined Longhouse

This product is part of the Hagglethorn Hollow - The Wizarding District

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The Tavern dominates the tiled district of the wizards. Built upwards instead of out, the Tavern has rooms, food, and drink for the weary traveler.

Three versions of the Hagglethorn Tavern are included with this download:

The main model with sculpted cuts for printers with a print bed size of 200mm X 200mm
A folder named “Small Printer” containing cuts for printers with a print bed size of 120mm X 120mm
A folder named “Complete” with an uncut version for larger printers and scaling down purposes

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack
Product measurements can be found in the image gallery
Copyright Printable Scenery under license from Tabletop Troubadour Games
First Published version 1.6

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Painting Hagglethorn Hollow: Ruined Wizarding District

Posted on September 10, 2021July 24, 2025 by Mike Los

The red tiled roofs of the Wizarding District make a striking scene and a great gaming table. This guide will show you how to achieve the same look as the studio models in 4 easy steps! This model in this guide is the Ruined Hunters Lodge, however, the same guide applies to the Tavern, Guildhall,… Read more

Painting Hagglethorn Hollow: Ruined Old Town

Posted on August 27, 2021July 24, 2025 by Mike Los

The crumbling ruins of the Old Town are great for gaming with easy access to miniature placement and interesting internal details. This guide aims to show you how you can get yours painted and on the gaming table with a minimum of fuss. This guide uses the Ruined Barracks as an example but it is… Read more

Comments

CircuitRyder (verified owner) – August 20, 2021

how large of a print bed is needed to print the “complete” model at normal scale?
- Mike (verified owner) – August 20, 2021
  
  Hi CircuitRyder,
  
  You would need a print bed size of 307mm X 236mm X 218mm to print it complete at the same scale.
Kheldras (verified owner) – August 26, 2021

This is such a gorgeous house… i just wish the 2 levels in the roof (The wooden one,. and the one the Balcony leads to), had interiours too… so, its just 1 Mega massive block. Sadly, like most of the Hagglethorn houses.

Is there any this this gets interiors in the “roof” area?
- Mike (verified owner) – August 27, 2021
  
  Hi Kheldras,
  The Tavern will have its interior exposed with the ruined version but the complete ones are enclosed as per the original design
Kheldras (verified owner) – September 2, 2021

I know, Mike, i own them too. But thats why i ask. Will such a design for the upper floors ever happen?
- Mike (verified owner) – September 3, 2021
  
  Currently, there aren’t any plans to add interiors to the bigger buildings. However, we always take on feedback and will add it to our list of possible model updates for the future.
madwalrus (verified owner) – September 9, 2021

Is there a assembly guide for this? I am in the process of putting it together and i cant seem to find the right location for the roof sections to sit on the middle of the tavern.
- Mike (verified owner) – September 10, 2021
  
  Hi Madwalrus,
  
  Is that for the small printer cuts? The normal cuts have all the floors together. We can look at putting together a diagram that should help
meakmarr (verified owner) – August 4, 2022

What are people averaging print speed wise on the larger complete parts? I’m getting quotes of 3ds for 10%infil at 50mms .12 later with .4 nozzle.
- Jo Boorer – August 4, 2022
  
  This sounds right for the Hagglethorn range as they take longer than our other Printable Scenery models as these are based on hand sculpted models.
joseph fredona (verified owner) – May 19, 2023

dungeon level part c will not slice for some reason on Cura, is this a known problem?
- Jo Boorer – May 22, 2023
  
  Try turning on the buildplate. This seems to fix Cura issues.
Gnomeinbrain (verified owner) – September 20, 2023

Will these models print without supports? If not, do you have suggested support settings?
- Jo Boorer – September 25, 2023
  
  In The Hagglethorn range an option with supports is supplied for those models that need it.
  The Tavern is printable without supports.