Name: Stone Barn
Brand: Dungeons and Dragons
Availability: InStock

Description

The giant rats waited and watched whilst the children played amidst the straw bales under the patched roof of the stone barn. The kids were safe as they had brought hunks of cheese as tribute.

To build the Stone Barn as pictured you will require pieces from other sets including Rustic Stone Floors and Clip Caps set. To assemble the Stone Barn and other buildings of Clorehaven you can download the Assembly Guides . The Assembly guide has Clip Caps instead of Rustic Stone Floor, but either can be used.

Link to Door Assembly Guide.

Updates:

1 May 2020 (version 1.1) More doorway options added.
2 June 2020 (version 1.2) A-Wall-Stone-Barn-1-v1.0 added.

Notes for Stone Barn:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Top Locking Variations Reference

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	100% for resin printing, 10%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Clorehaven Modular Roofs Assembly Tips

Posted on November 22, 2019July 23, 2025 by Matt

To assemble the roofs from the Modular Shingle Roof we’ve provided some helpful diagrams of some configurations.

3 Comments

Painting Guide: Clorehaven

Posted on October 25, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint the city of Clorehaven. The models were initially primed with Army Painter Matt Black Stone This is the scheme used on all the stone. Heavy dry-brush: Army Painter Dungeon Grey. Lighter dry-brush: Army Painter Ash Grey. Wood & Stucco This is the scheme used on all… Read more

10 Comments

Clorehaven Assembly Guides

Posted on September 6, 2019July 23, 2025 by Matt

To assemble any of the Clorehaven buildings you can download the following assembly diagrams: Basic House (from Clorehaven Trial Pack) Alchemist Guild The Manor Inn Chapel Inn of the Welcome Wench Homestead Tavern Townhouse Watch Tower Cottage Grand Hostel Terrace Housing Library Guardhouse Stone Barn Modular Battlement There will be additional diagrams added for the… Read more

102 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

james.mace (verified owner) – January 8, 2020

Would it be possible to have the 3 doors in this available without steps? So this can be placed beside other tiles as opposed to on top. Would be amazing for this and any other sets that have doors with steps to have stepless versions (noticed some do but some, like this set, don’t).
- Sam Campbell (verified owner) – January 8, 2020
  
  Yes we have added that in for future work.
Tom Tumbusch (verified owner) – January 28, 2020

The initial version of the assembly guide for the Stone Barn doesn’t include the doors or floor tiles shown in the photos.
- Sam Campbell (verified owner) – January 28, 2020
  
  Yes, this is explained in the description. You can use either clip caps or floor tiles.
Matthew (verified owner) – March 27, 2020

Love the design. Just wanted to second the desire to have versions of the doors without the steps. I was hoping to use it with the drawbridge (https://www.printablescenery.com/product/rampage-drawbridge/).
- Sam Campbell (verified owner) – March 27, 2020
  
  We have a version planned without the steps and this will be designed after last stretch goals are completed for Clorehaven.
Håkan Karlsson (verified owner) – April 30, 2020

Can you please update the assembly guide to include the doors? Only the door frame is in the assembly guide.
- Sam Campbell (verified owner) – May 1, 2020
  
  Assembly guide has been updated.
berny80 (verified owner) – May 5, 2020

why are A doorway stone barn without step and A wall stone barn 1v1.0 the same? I think in the last update something went wrong with regards to the second file.
- Sam Campbell (verified owner) – May 5, 2020
  
  Thanks for this, it is a duplicate. We’ll get this updated.
thordic (verified owner) – May 28, 2020

I downloaded today and the first level assembly guide says you need 4 of “A-Wall-Stone-Barn-1-v1.0” but this file isn’t in the download – the ZIP only has A-walls 2, 3, and 4. The reference photo omits Wall 1 as well, so I’m guessing this file shouldn’t be there but I wasn’t sure what the correct file should be to print in it’s place. It’s line #8 on the Level 1 assembly guide.
- Sam Campbell (verified owner) – May 30, 2020
  
  Thanks, We’ll get this file uploaded.
malottmanbrad (verified owner) – June 2, 2020

Would it be possible to have a Q-Double-Doorway-Stone-Barn-opt2-v1.0 (or any of the door tiles) that lines up with the larger bottoms of the Buttress walls? As of now it looks like the wall lines up when using A-Schist-Walls but not the A-Buttress-Wall-Schist-Battlement-w-Crenellation-v1.0.
- Sam Campbell (verified owner) – June 2, 2020
  
  The buttresses were made to be larger so they could differentiate between the straight walls and the sloped walls.
yith – July 2, 2020

Won’t “double doorway stone barn opt2”, the one without a floor, require a slightly taller door than the others?
- Sam Campbell (verified owner) – July 2, 2020
  
  “double doorway stone barn opt2” is an archway and has no hinging mechanism as was a customer request. We’ll get the name changed on it.
yith – August 5, 2020

Ok, so we still really need a large gateway without steps.
- Sam Campbell (verified owner) – August 5, 2020
  
  It has been released here https://www.printablescenery.com/product/clorehaven-portcullis-and-arch/
yith – September 25, 2020

Sam, sorry to pester.

But the Portcullis and arch is not what I’m looking for.

I’m looking for a gateway suitable for cavalry and larger (eg carts) to go through that is not a portcullis or drawbridge, but actually a double gateway, with a wooden gate.

Also it must not have a step or a floor.

This is for the gateway to a town.

And it needs to work with OpenLock.
- Sam Campbell (verified owner) – September 28, 2020
  
  The pieces will work if you are using openLOCK inside and outside of the entrance. Otherwise the gate entrance and wooden doors will have to be stretched or redsigned. There is an option for Q-Double-Archway-Stone-Barn-opt2-v1.0 which goes to full ground level but is just an arch.
Hollie-Lyn James (verified owner) – June 30, 2024

I have tried to print the front of the barn (Double Doorway Stone Barn V1.0) at least 6 times. I have sliced and resliced. I have tried to print on 2 different printers (Creality CR6-SE and a FLSun V400) and it fails about half way through every time. I am not sure why, but without the front piece, this has not worked for me.
- Joanne Boorer (verified owner) – July 1, 2024
  
  Hi
  
  Can you please email us at [email protected] with a photo of the error so we can investigate?