$12.95
The ruined quarters are a set of 14 3D printable ruined sections stacked in several different ways to create a diverse range of ruined structures for tabletop wargames and roleplay games. They are designed to pair with other ruins like the Rickety Lodgings, Burgomeisters Office, and the Mayor’s Townhouse or just to be used on their own to create more building shells throughout a ruined city. The Ruined Quarters pairs extremely well with the Gangways, Stairs, and Ladders and Scaffolding and Support Columns to create a maze of buildings and walkways for parties to navigate.
The Ruined Quarter’s print without the need for supports.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
They had been lost for days in the winding streets of the ruins. All the corners had started to look the same, or maybe that was them going round and round in circles…
Notes:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 10% for FDM printing, 100% for resin printing |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
In this video we demonstrate some effective techniques and tips you can use when assembling modular ruins using Murder Row. The same technique will apply for many of the other Shadowfey Ruins. Remember to take care when using superglue and other hazardous materials.
The dilapidated and haunted Shadowfey Ruins provide an excellent setting for horror themed encounters and games in ruined cities. This guide will help you achieve that look with a minimum of fuss so you can get gaming! This guide uses the Squatter Townhouse as an example but it is the same method we used for… Read more
You must be logged in to post a question.
epic –
What is the biggest size (cm or inch) of these parts?
Nicholas Jebson (verified owner) –
The largest section of the ruined quarters is 13.42cm x 6cem x 11.38cm.
epic –
What size have these files if I print them for 28mm? Dunno if they are too big for my printer.
Nicholas Jebson (verified owner) –
They are pre-scaled with 28mm miniature wargaming in mind, so no additional scaling is necessary
Richard Baker (verified owner) –
I’m printing Ruined-Quarters-Base-Opt2-v1.1 and Ruined-Quarters-Base-Opt4-v1.0 and they seem to have straight horizontal spans for the wooden beams. How are these going to print without supports on an FDM printer?
Nicholas Jebson (verified owner) –
As they are a flat traverse, most slicers now have a bridging setting that allows them to print a flat line in the open air between 2 anchor points. The extruder keeps tension on the filament as it is extruded to stop its sagging. For instance, in Cura you can activate bridging by going to: Preferences- configure cura- settings and scrolling down to the Bridging settings under ‘experimental’ (though it has been so well proven now it should just be a function in its own right).
Richard Baker (verified owner) –
Thanks Nicholas! I actually found this setting last night after hours of head scratching!
Nicholas Jebson (verified owner) –
No problem, happy to help.
Pedro Baltazar (verified owner) –
I’m having difficulties successfully printing base options 2, 3 and 4. Due to the high amount of random shapes and detail on the floor part of the bases, my printer has to jump a lot from one point to another. This in turn means the filament gets retracted a bunch of times in a short time frame, which at some point during the print results in enough damage to the filament string to make it impossible to pull through gear rotation.
I have already tried messing with the gear tightness to try to prevent this from happening, but no matter how light the pressure is set up to, the constant retractions always manage to tear through the filament.
Mike –
Hi Pedro,
Do you have z hop and retraction enabled? From what you’re describing it might be worth trying to print with them turned off and see if that helps. Or if you don’t have Z hop enabled give that a try aswell although that’s usually due to fix the extractor hitting parts of the model as it moves about.
ken long (verified owner) –
Will these resin print without supports?
Jo Boorer –
I would recommend using supports when printing in resin
jakewhebbe (verified owner) –
Hello,
Got this set and close to completing a good portion of the prints. i noticed this set does not have notches for ease of modular stacking and unpainted the levels seem to slide around alot i am concerned that they may fall while playing with the set. at this point i am contemplating glueing them. ( not a huge deal ) but wonder if you have a solution for prints of this nature.
i am still new to 3d printing and this could a result of a variant in the PLA i chose.
Jo Boorer –
Thanks for pointing this out. I we add this to our model updates list.
emanuelelambiase –
Hello,
the external layers of models on your site are quite smooth and without the usual “lines” that are present on last layer of a models after the 3D print.
Which is the method you can suggest to reach such external smooth layer?
Thank you in advance.
Jo Boorer –
For our tips and tricks we have an article at this link. https://www.printablescenery.com/2023/05/27/tips-for-painting-3d-printed-models/
icristian.hrimiuc (verified owner) –
Could you please add a version with alignment pins? They slide too easily when stacking which makes them hard to present and carry 🙁
Matt Barker –
This model designed to be glued together in different combinations, the alignment pins would be visible if you only wanted to use the bottom levels. However we could make a set with alignment pins and add it in a separate folder.
icristian.hrimiuc (verified owner) –
Hi, thank you for your answer 🙂 Gluing the model together indeed solves the sliding problem, but it forces the user to print, paint, and store each piece too many times. The initial design is awesome, I do not wish to change that, having stackable pieces that can be arranged and combined at any point allows for easier storage, transport, and overall usage. I just wish they had some sort of alignment pin system that helps them stay vertical without restricting the initial recombination design, something similar to the Hagglethorn Hollowor system. I’m writing here as a suggestion, if you have time for it, as I am sure others will agree this would be an improvement to the models.
imgnomish1 (verified owner) –
Having serious issues with the Bambu slicer erroring out on the Roof opt1, and roof opt2 and opt3 have need of support.
Matt Barker –
Hi could you please email [email protected] with a photo of the issue and we can check it out for you
igougogamer (verified owner) –
Hi there, would these ruins need rescaling for the modern size of the Age of Sigmar/Warcry miniatures?
Thank you
Joanne Boorer –
Hi, the Shadowfey range buildings were made for 28mm minis but the boarded up doorway of this building is high enough for 32mm minis.