Cart (0)

Product Categories+

Guardian Statues


Any sales taxes will be calculated in the checkout.

The Guardian Statues are a set of 8 humanoid effigys on crumbling plinths, designed for use as objectives or scatter terrain for tabletop role playing games and wargames. The Crone, Father, Maiden, Mother, Smith, Stranger, Warrior and Wizard give a variety of sculpts to represent a wide range of possible gods or great people.

All files are provided with pre-supported options for resin printing, as well as enlarged and hollowed versions.

The Father and Smith will require supports touching build-plate for printing in FDM due to the nature of their poses.

This product is part of the Shadowfey Ruins. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Just think, Long after history has forgotten us and the empire is a distant memory, those statues will still be standing their silent vigil over the ruins of our home.


  • 27 August 2021 (version 1.7) Maiden statue has leveled to sit on build plated.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.
  • Hollow version and pre-support version for resin printers included in the zip file.
  • First Published version 1.5

Additional information


10% for FDM printing, 100% for resin printing

Layer Height

0.05 high quality on resin printers, 0.1 high quality on FDM printers


requires supports for resin printing, Requires supports on some files

4 questions for Guardian Statues

  1. redmoonland

    The statue with only 1 leg is very strange, I’ve never seen any statue in real world damaged in that way and remain standing, especially when the upper body of the statue was that massive and looks heavy, and the whole statue was made fo stone.

  2. Revengancedk (verified owner)

    how large is this file? It went above 500mb so far and then cancels

    • Nicholas Jebson (verified owner)

      We have just updated the file so that it is only 633mb, It originally had non-pre-supported hollowed files but they have been removed.

  3. Fabrizio Guzman (verified owner)

    in which files supports are needed? I’m using an FDM printer, thanks

    • Nicholas Jebson (verified owner)

      The wizard, Warrior, stranger, maiden, and crone do not need supports when FDM printing. The mother, father, and smith do. That being said they should only need supports touching the build plate.

  4. kagbb (verified owner)

    The maiden isn’t flat at the bottom, it shows when you try and add a brim for adhesion

    • Mike (verified owner)

      HI Kagbb,

      Thanks for informing us, we’ve got a new version with a flat bottom on the way

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey