Cart (0)

Product Categories+

Ruined King Stables


Any sales taxes will be calculated in the checkout.

The Ruined Kings Stables is a large, two-story building with much of it’s roof destroyed, exposing the rubble strewn upper floor. The bottom floor is untextured so it can be made to match the dirt ground of your table and provides room to place groups of miniatures in games.

This product is part of the Complete King. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.


When a King’s horse is fed better than the peasants who starve in the streets and the mass of raging, hungry peasants outnumber the guardsmen of the royal liveries, then the destruction of such buildings as the Kings stables is inevitable.

Notes for Ruined King Stables STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Small Printer reference sheet is included in the zip file.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

Ruined King Stables STL

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


requires supports for resin printing, Prints without Supports

1 question for Ruined King Stables

  1. owen camber (verified owner)

    what are your recommended settings for a pla printer for these buildings?

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey