Ruined Country Manor

Name: Ruined Country Manor
Brand: A Song of Ice & Fire
Availability: InStock

$12.95

Any sales taxes will be calculated in the checkout.

The Ruined Country Manor is a large, stone and thatch building that has had it’s roof caved in. The interior is detailed with debris, fallen masonry and thatch. Included in the download are the options for an alternate entry porch.

Also check out the non-ruined version here.

This product is part of the Complete Country

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

With taxes raised ever higher to fund his Majesties war, the pinch on the purse is felt hardest on the hard-working farmer. This ruined country manor tells a grizzled tale of what can befall the greedy lord when his serfs have been bled dry and rise up.

Notes for the Ruined Country Manor STL :

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small printer reference sheet included in the zip file
Product measurements can be found in the image gallery.
First Published version 1.6

Ruined Country Manor STL

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How to paint Medieval Textures

Posted on November 3, 2022July 24, 2025 by Mike Los

In a previous post we covered how to paint the stone walls from the Country and King buildings. This article shows you how to paint medieval textures used on the terrain. In particular, the wood, roof tiles, wattle & daub, and hay. Wood & Roof Tiles After undercoating, basecoat the Wood with Oak Brown and… Read more

3 Comments

How to paint realistic Stone Walls

Posted on August 11, 2022July 24, 2025 by Mike Los

In this article, we’re going to show you how to paint the realistic looking stone walls from Country and King, and its easier to achieve than you might think. After doing plenty of research, and trial & error, we’ve come up with an effective method to recreate the pale stone look of medieval Europe. You’ll… Read more

24 Comments

Comments

Stuart Dobson (verified owner) – October 10, 2025

Orca Slicer is refusing to print Ruined-Country-Manor-Lv1-v1.6.stl because of multiple errors. When I loaded it into Blender I can see many instances where the planks on the floor are not supported, holes in the base plate etc. I can send you pictures showing these. 3D builder reports no issues.
Stuart Dobson (verified owner) – October 11, 2025

I’ll answer my own question in case anyone else encounters a similar problem. If you get the floating islands message in Orca change any setting (I changed Infill to a different pattern) and reslice. Orca is then happy to print with no errors.
- Joanne Boorer (verified owner) – October 13, 2025
  
  Thanks for your feedback