Cart (0)

Product Categories+

Country Manor

$12.95

Any sales taxes will be calculated in the checkout.

The Country Manor is a large, thatch-roofed, stone building based on its like from medieval times. Inside there is a fireplace with chimneys and textured flooring for furniture to be added to. There are also alternate doorways you can use as well as a front annex.

Also check out the ruined version here.

This product is part of the Complete Country. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.

Description

Wealthy lords who take tithes from the farmers working their lands boast stunning countryside estates such as this manor. From here, they can keep a closer eye on the laboring serfs when not attending court in the city.  

Updates:

  • 7 June 2024 (version 1.6) The brim of the roof now sits flat on the build plate as one piece.

Notes for the Country Manor STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Small printer reference sheet included in the zip file
  • Product measurements can be found in the image gallery.
  • First Published version 1.5

Country Manor STL

Additional information

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

requires supports for resin printing, Prints without Supports

2 questions for Country Manor

  1. The reluctant expert (verified owner)

    I had a bit of trouble printing the main roof section. While printing the first few layers where the thatch is not attached to the roof. It has a very small footprint on the bed and as a result I found that the small thatch sections would come loose and attach in random spots on the roof. my Prusa powered through and it wasn’t hard to clean up once the print was finished but this is the first model i’ve had from printable scenery that has had an issue like this.

  2. flyingelvis (verified owner)

    I have the same issue with the roof but I cannot get it to stick to the bed at all. Is there a solution for this?

    • Joanne Boorer (verified owner)

      Thanks for pointing this out.
      I am sending it to a modeler to fix.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey