Name: Rough Stone Floors
Brand: Dungeons and Dragons
Availability: InStock

Description

Though cracked and rough, these solid stone slabs hold an echo of more refined tiles.

Updates:

7 June 2018 – Ruin E tiles added. These prints are on their side as supports have been removed.
11 June 2018 (version 1.2) Small mesh repair to ER2-TRP-Roughstonefloor.
25 June 2018 (version 1.3) Updated Ruin floor tiles.

Notes for Rough Stone Floors:

To see the differences between similar tiles, refer to the OpenLOCK template pic in the gallery.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

19 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

lootcursed (verified owner) – July 20, 2018

Im running into an issue where running the E trp floor without supports leads to the supports not building all the way up. Any idea for a fix for this? Is it my nozzle height?
- Matt Barker – July 20, 2018
  
  Yes, if you print it on its side it will work
tfelts – September 19, 2018

Does the ‘Rough Stone Floor’ and the ‘Stone Floor’ packs have the same number of files and the same shapes or is there a difference besides just the texture?
- Sam Campbell (verified owner) – September 19, 2018
  
  The Rough Stone Floors has the new Tessellation set where as the Rampage Stone Floors is a legacy texture set.
lacium (verified owner) – October 26, 2019

XG tile does not open in PrusaSlicer, it claims the object is 0x0x0mm size large.
- Sam Campbell (verified owner) – October 29, 2019
  
  This tests ok in Prusa Slicer. I would recommend re-downloading the file.
Clarence Gustafson (verified owner) – June 23, 2020

How the heck do you fit the hatch doors into the hatchway? I ended up using a pair of pliers, but it was super tight and doesn’t swing well.
- Sam Campbell (verified owner) – June 23, 2020
  
  You need to make sure that there isn’t any printing excess, a light sand should accomplish this. Then you insert and firmly slide the hatch into place.
mrebivens – August 1, 2020

just out of curiosity, are these and the other extra floor textures (slate, dargon, castle 2, etc) part of an add-on set, or only available as the individual packs?

Thanks,
- Sam Campbell (verified owner) – August 3, 2020
  
  Yes, they are part of this pack. https://www.printablescenery.com/product/floor-booster-packs-add-on/
Randall Hand (verified owner) – August 24, 2020

Where is a wall compatible with the OA diagonal? I’m trying to build a large Octagonal room, but can’t find a wall combo that works…
- Sam Campbell (verified owner) – August 24, 2020
  
  PC and PC Mir are wall pieces that match this diagonal on the OA piece.
Gabriel Garner (verified owner) – September 21, 2020

Is there a more up-to-date diagram that covers all the additional pieces in the set and their corresponding wall codes?
- Sam Campbell (verified owner) – September 23, 2020
  
  These have been added in the description.
Gabriel Garner (verified owner) – September 24, 2020

Thanks Sam! But more specifically, what I was hoping for was an update to the Rampage openLOCK tile guide (posted in the knowledgebase) with a complete listing of the codes for floors and walls and an illustration of how they relate to each other. Or if something like this already exists, where I could find it?

Loving the product btw. The quality is excellent!
- Sam Campbell (verified owner) – September 28, 2020
  
  There are guides that will help with configuring for different purposes depending on what you want to achieve:
  https://www.printablescenery.com/category/knowledgebase/rampage/
  https://www.printablescenery.com/category/knowledgebase/openlock/
  https://www.printablescenery.com/2019/09/06/clorehaven-assembly-guides/
mikekannard – September 26, 2020

Is there a way to get Rough Stone Floors in EA-G-TRP in order to hug the outside of a G curved wall?
- Sam Campbell (verified owner) – September 28, 2020
  
  Yes, we recently did this for https://www.printablescenery.com/product/castle-floor/, the piece is call EA-G
SC (verified owner) – June 6, 2021

Is it possible to get this EA-G in rough stone added to the downloads please?
- Nicholas Jebson (verified owner) – June 8, 2021
  
  Hey SC, I’m not entirely certain what you’re asking? Both the EA and G files are available in the download folder for the Rough Stone Floors.
SC (verified owner) – June 10, 2021

We have floor “F”, for the interior of a “G” wall.
We have T, which will fit floor F directly.
What we’re lacking is a floor tile that goes on the exterior of a “G” wall (see castle-floor tile “EA-G”)
- Mike – June 10, 2021
  
  Hi Steve,
  
  Thanks for pointing this out! We’ll add it to our model update list to be created. Once it has been made you’ll receive an email with the updated floor piece 🙂
SC (verified owner) – June 12, 2021

Thank you Mike, look forward to the email – now back to dungeon printing!
Doc Webb – June 11, 2022

Is this tile set available as part of any existing bundles or late pledges, either here or via Terrain Tinker? I’ve accidentally “doubled up” on tile sets a few times and figured I should check first, just in case. 🙂 Loving the tiles — thanks in advance for your help!
- Jo Boorer – June 13, 2022
  
  These are not part of a bundle or pledge but could become part of a set in the next Terrain Tinker kickstarter.
cdilts (verified owner) – August 4, 2023

Can these be printed vertically? When I print it laying flat on the bed the textures on the tiles come out very different from the example pic.
- Jo Boorer – August 7, 2023
  
  Yes, these can be printed vertically.