Description
In readiness for Winter’s approach, the rooms of the castle bustle with servants alternately scrubbing the solid flagstone floors with scented lye soap, or laying fresh rushes and herbs where the floors have already dried. All the while, the word is hurriedly passed from ear to ear “The King approaches – be hasty!”
Updates:
- (version 1.1) File Pack contains the 3/4 floor tiles EC and ED.
- (version 1.2) Small mesh repair to A-RPG-Castle-Floor-v1.2.
- 25 May 2017 (version 1.3) Small mesh repair to the following tiles.
- BA-RPG-Castle-Floor-v1.3
- B-RPG-Castle-Floor-v1.3
- C-RPG-Castle-Floor-v1.3
- D-RPG-Castle-Floor-v1.3
- H-RPG-Castle-Floor-v1.3
- IA-RPG-Castle-Floor-v1.3
- QA-RPG-Castle-Floor-v1.3
- QB-RPG-Castle-Floor-v1.3
- QC-RPG-Castle-Floor-v1.3
- Q-RPG-Castle-Floor-v1.3
- F-RPG-Castle-Floor-Hatchway-v1.3
- 7 July 2017 (version 1.4) Contains a XG Floor tile.
- 20 September 2017 (version 1.5) Contains the NEW DS floor and TRP EA floor.
- 8 December 2017 (version 1.7) Replacement E tile due to same slicing issues for some printers.
- 16 February 2018 (version 1.8) Updated to Triplex.
- 22 March 2018 (version 2.0) Contains V Hatchway and E+A Hatchway
- 27 February 2020 (version 2.1) Updated E tile added.
- 29 June 2020 (version 2.2) EA-G Castle floor and 5×5-X Castle floor added.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
John Schmidt (verified owner) –
Is there a hatch way tile that goes with the 8 inch tower? One that corresponds with the V-TRP Castle Floor v1.0?
Rex Foot –
Would the “V” tile in this pack be what you are looking for?
John Schmidt (verified owner) –
Just downloaded it there is no V tile with a Hatch in that pack.
Matt Barker –
Sorry, no there is no V tile with a hatch, I’ll have to make one.
Matt Barker –
Rex, the V tile has no hatch in this pack. We could make one though
bustercrafty (verified owner) –
Do I have to re-scale W-TRP- floor to fit the curve of X-TRP-walls ? it dosent seem to line up right
Sam Campbell –
X and W have the same interior curce diameter and both fit on the outside of a V. We’re currently developing a piece that fits on the outside of an X to make a square.
christianaahauge –
So in the pictures it shows the print speed at 90, is that really how fast you print these tiles?
Sam Campbell –
We recommend printing at the speed that works well for your printer. These pictures are only for size reference on a slicer.