Name: Stone Floors
Brand: Dungeons and Dragons
Availability: InStock
Rating: 5.00 (1 reviews)

Description

Worn with the passage of years and boots, the stone floors still look as solid as they did on the day they were laid. Oh the stories they’d tell if they could speak.

Updates:

(version 1.2) contains the missing SA tile.
7 July 2017 (version 1.3) Contains XG Stone Floor Tile.
21 September 2017 (version 1.4) Contains EA-TRP-Stone-Floor-1.0.
10 April 2018 (version 2.1) Updated to Triplex
8 October 2018 (version 4.0) All floor tile options added.
16 October 2018 (version 4.1) Repair to U-TRP-Stone-Floor

Notes for Stone Floors:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Click here for the painting guide
Product measurements can be found in the image gallery.

Stone Floor Reference

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
File Type	STL files in ZIP folder
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Print Volume	100mm x 100mm x 100mm print build volume required
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

19 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

1 question for Stone Floors

Brian Webster (verified owner) – June 12, 2017

Is there a D or Q stone floor section?
- Matt Barker – June 12, 2017
  
  Yes in here https://www.printablescenery.com/product/rampage-flat-stone-ends/
stuyck.jef (verified owner) – July 14, 2017

When i look at your picture of the 4 V tile’s, i notice you had problems with bending aswell, did you find a solution for this ?
- Matt Barker – July 15, 2017
  
  Yes, On the Prusa I3Mk 2, if you print a raft and use a very small amount of glue stick there are never any problems with with bed adhesion
Michael – July 19, 2017

You say 28mm scale, is that 1″ = 5′? 1 square = 1″?
- Matt Barker – July 20, 2017
  
  28mm scale is approximately 1:58 There is a help article here on scaling https://www.printablescenery.com/knowledgebase/scaling-printable-scenery-models
Jimmydark (verified owner) – October 9, 2017

Should we expect to get a TRP version of the E floor soon?
- Matt Barker – October 13, 2017
  
  Yes, we will be making a full set of TRP floor upgrades soon
labreaksmike (verified owner) – October 19, 2018

Hi. Do you have any lists of pieces to print first to get a good start (maybe 1 or 2 rooms worth)? Such as so many “E” tiles, so many “A wall” etc for a basic set to optimize printing time. I’m starting with these floors and the low walls (which I will be buying soon), and will expand sets from there. Does this list of the openlock/open forge (https://github.com/devonjones/openforge-tutorials/blob/master/sets/openlock.md ) line up with these pieces? I’ve spent a lot of time researching my tile options, and I;m excited to get started. Thanks.
- Sam Campbell – October 23, 2018
  
  It really depends on what you want your first dungeon to be. Plan out your dungeon and then total all your pieces you are going to need. If it’s a large expansive roomed dungeon you’re going to need more floors and less walls, if it’s a maze you are going to need a higher ratio of walls and columns to floors. To optimize printing time load up 4 or 5 items on your print bed to print at any one time of similar sized pieces if not the same pieces. I usually will do a couple of smaller prints of 4 columns or 2 arches etc. during the day and print of around 6 floors or walls on a single print overnight.
  
  When you do your second dungeon plan out what the layout and then print what you need to make the difference if you need to.
SC (verified owner) – June 6, 2021

For those who made the same mistake as me, these are not the same as the stone base’s from the trial pack – you want “rough stone floor” !!!
Rated 5 out of 5

Doc Webb (verified owner) – June 9, 2022

I’m absolutely loving the Rampage system, but, working on a slightly more complex build, I have a question: is there a floor tile in this or any other set with a concave curved edge that would fit the exterior curve of the X-TRP walls? I don’t necessarily need connectors in the base, but I’d like something to use that would lay snuggly against the exterior of the doors in the X walls. Thanks!
- Jo Boorer – June 9, 2022
  
  This floor style is not currently available but I have added your suggestion for possible model update.
Andre (verified owner) – February 19, 2024

I had gotten rid of my old Anet printer several years ago after printing a ton of the Rampage packs I bought. I just got a new printer and wanted to download all of the new versions. Once of my orders has Extended Floor Pack, but it is not linked to anything to download. I imagine that all floor tiles are now part of this pack. Is that correct?
- Jo Boorer – February 19, 2024
  
  Email us at [email protected] so we can help you access your files.
t.kruijs – March 25, 2025

Man, I miss these old sweet O tiles, I wish all the sets had the entire set of shapes, even if cropped textures.
- Joanne Boorer – March 26, 2025
  
  Thanks for your feedback. I will add you comment to the updates board.