Rampage Heavy Wall Door

Name: Rampage Heavy Wall Door
Brand: Dungeons and Dragons
Availability: InStock
Rating: 5.00 (1 reviews)

$7.95

Any sales taxes will be calculated in the checkout.

Rated 5.00 out of 5 based on 1 customer rating

(1 customer review)

The Rampage Heavy Wall Door is designed to be used as either fixed grating, or a door. The door will clip into the door frame once the grating is removed. The grating will also act as a support for printing the door frame.

Please increase your fill density to at least 20% for added strength for the A, C and D components.

Please download the base file set to get the OpenLOCK Clip.

This product is part of the Rampage Complete Dungeon

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Updates:

1.1 Now includes frames without gratings.
3 May 2018 – 3.0 Updated to Triplex
5 February 2019 – Filament door connection
22 June 2020 (version 3.3) Minor overhangs fixed.
2 August 2022 (version 3.4) AS tile added.

Notes for Rampage Heavy Wall Door:

Supports must be turned on when printing the Heavy Wall Door without built-in support.
Rampage is a modular interconnecting scenery-building system that allows you to build everything from perfect dungeon tiles to large buildings and fortifications.
Rampage uses ‘OpenLOCK’ locking clips to attach the walls to floors so you can mix and match to make amazing combinations. The walls tessellate perfectly, allowing you to make true-form tiles, rooms, and buildings.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Please also get the locking clips from the base pack here.

Heavy Wall Door with support Reference

Heavy Wall Door without support Reference

Heavy Wall Door Reference

Heavy Wall Door OpenLOCK STL Age of Sigmar Kings of War Dungeons and Dragons

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
File Type	STL files in ZIP folder
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Print Volume	100mm x 100mm x 100mm print build volume required
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

1 question for Rampage Heavy Wall Door

mercmmm (verified owner) – March 5, 2017

The doors only connect on one side?
- Matthew Barker – March 6, 2017
  
  Yes the walls only connect on one side
Skip Stephenson (verified owner) – December 3, 2017

Will there be a future addition of an “S” type tile for this door?
I’ve had better success printing this door than the heavy doors, and being able to fit one of these in the middle of a dungeon hall would be quite nice. So far I’m getting a 1 out of 5 success ratio for the heavy doors printing in the frame, they have a tendency to break off at the bottom pin so I have to glue them or toss them as fails.
- Matt Barker – December 9, 2017
  
  Have you tried the other doors now that they have been updated?
eric7 (verified owner) – March 22, 2019

Do any of your sets have 1 inch wide doors? It seems an odd omission considering 5 foot doors are more common in the modules than 10 foot doors.

Also do any of your sets have double doors (i.e. 10 feet wide), again most modules use these doors extensively.
- Sam Campbell – March 22, 2019
  
  We’re looking at two releases in the upcoming kickstarter to address both of these.
Rated 5 out of 5

Doc Webb (verified owner) – April 18, 2023

A great set, as with all of the dungeon sets. Thanks for the inclusion of the AS tile — that’s been hugely helpful in dungeon-planning! 🙂

Do you all offer any sets that are essentially full wall pieces of a grate, as the doors in this set, such as could be used to make a jail cell wall? I couldn’t find any looking through my pledges or through the search function, but I certainly might just be missing it!
- Jo Boorer (verified owner) – April 18, 2023
  
  There is no wall like this, as these were only meant as support for the doorways.