Cart (1)

Product Categories+

Rampage Heavy Wall Door


The Rampage Heavy Wall Door is designed to be used as either fixed grating, or a door. The door will clip into the door frame once the grating is removed. The grating will also act as a support for printing the door frame.

Please increase your fill density to at least 20% for added strength for the A, C and D components.

Please download the base file set to get the OpenLOCK Clip.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.



  • 1.1 Now includes frames without gratings.
  • 3 May 2018 – 3.0 Updated to Triplex
  • 5 February 2019 – Filament door connection
  • 22 June 2020 (version 3.3) Minor overhangs fixed.


  • Supports need to be turned on when printing the Heavy Wall Door without in built support.
  • Rampage is a modular interconnecting scenery building system that allows you to build everything from perfect dungeon tiles to large buildings and fortifications.
  • Rampage uses ‘OpenLOCK’ locking clips to attach the walls to floors so you can mix and match to make amazing combinations. The walls tessellate perfectly allowing you to make true form tiles, rooms and buildings.
  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Please also get the locking clips from the base pack here.

Heavy Wall Door with support Reference

Heavy Wall Door without support Reference

Heavy Wall Door Reference

Additional information

File Type

STL files in ZIP folder


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Print Volume

100mm x 100mm x 100mm print build volume required


Prints without Supports

3 questions for Rampage Heavy Wall Door

  1. Avatar

    mercmmm (verified owner)

    The doors only connect on one side?

    • Avatar

      Matthew Barker

      Yes the walls only connect on one side

  2. Avatar

    Skip Stephenson (verified owner)

    Will there be a future addition of an “S” type tile for this door?
    I’ve had better success printing this door than the heavy doors, and being able to fit one of these in the middle of a dungeon hall would be quite nice. So far I’m getting a 1 out of 5 success ratio for the heavy doors printing in the frame, they have a tendency to break off at the bottom pin so I have to glue them or toss them as fails.

    • Avatar

      Matt Barker

      Have you tried the other doors now that they have been updated?

  3. Avatar

    eric7 (verified owner)

    Do any of your sets have 1 inch wide doors? It seems an odd omission considering 5 foot doors are more common in the modules than 10 foot doors.

    Also do any of your sets have double doors (i.e. 10 feet wide), again most modules use these doors extensively.

    • Sam Campbell

      Sam Campbell

      We’re looking at two releases in the upcoming kickstarter to address both of these.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Dungeons and Dragons RPG 3Dprinted Rampage OpenLOCK

Heavy Stone Double Door

Add to cart

Rampage Spike Window

Add to cart

Rampage Full Risers

Add to cart

Rampage MidWall S-tiles

Add to cart

Stone Floors

In cart

Rampage Heavy Walls

Add to cart
©2021 Printable Scenery. Website by Vienna & Bailey