Lifting Castle Gates and Arch

Name: Lifting Castle Gates and Arch
Brand: Dungeons and Dragons
Availability: InStock

$4.95

Any sales taxes will be calculated in the checkout.

The Lifting Castle Gate & Arch can be printed separately by using the Portcullis and Arch tiles, or printed as a whole using the Gate tile (you will need to remove the supports).

If you print the Portcullis separately it needs to be printed lying flat on the print bed.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is part of the Complete Rampage Castle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Already one of the scariest sounds in the world, the clank and rattle of a portcullis falling to the ground is even more terrifying when it’s behind you, and you thought the castle was empty.

Updates:

16 June 2017 (version 1.3) Small mesh repair to Q-RPG-Castle-Arch-v1.3.
27 March 2018 (version 1.4) Updated to Triplex.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

9 questions for Lifting Castle Gates and Arch

Jason Willetts (verified owner) – April 23, 2017

Is there any way you could design a set of double door to slot into here as well?
- Matthew Barker – April 23, 2017
  
  Yes, great Idea, we could make a few varieties to insert into the slot. I’ll put it in the next updates
josh.briffett – May 4, 2019

Will the double door insert be coming any time soon?
- Sam Campbell – May 6, 2019
  
  This is still in queue for suggested further development.
Wayne Hockensmith (verified owner) – May 3, 2020

Check out the Stone Barn updates I am going to use parts from it.
yith – July 2, 2020

Another vote for a door for this arch please.

Not all castles had drawbridges and not having a main gate is a major failing of the Rampage Castle.

(Another major failing being the lack of spiral staircases as castles are riddled with them)
- Sam Campbell – July 2, 2020
  
  There is a door available in the Castle Stone here: https://www.printablescenery.com/product/castle-double-door/
yith – July 2, 2020

Wayne Hockensmith:
Interesting, do the stone styles of the Clorehaven sets match Rampage ok?
- Sam Campbell – July 2, 2020
  
  The castle stone has larger bricks than Clorehaven Schist, but you should be able to match for the most part.
yith – July 3, 2020

Sam Campbell:
The castle double door is only a single level high as far as I can see. Not really a gateway passable by horses.
- Sam Campbell – July 3, 2020
  
  The https://www.printablescenery.com/product/clorehaven-portcullis-and-arch/ or https://www.printablescenery.com/product/stone-barn/ would be the closest to what you may need.
james.mace (verified owner) – July 13, 2020

it would be so amazing if this had a double door option! The other sets just don’t quite work..
- Sam Campbell – July 14, 2020
  
  Thanks for the suggestion. It’s definitely been requested multiple times and is being looked at..
ken williamson – February 7, 2022

Is there version without the connector nubs at the top? or is there a cap to put on the top?
- Mike (Printable Scenery) – February 8, 2022
  
  Hi Ken,
  
  The files in the download don’t have locking pins on top. Theyre there so that pieces you put above sit on more securely but they arent necessary
Jeremy (verified owner) – March 16, 2025

Any chance of getting a “D” portcullis to match the smaller “D” drawbridge option?
- Joanne Boorer (verified owner) – March 17, 2025
  
  Hi Jeremy, Thanks for your suggestion. I looked at a D-Wall by the smaller Drawbridge option and see it would be too big to be able to attach the drawbridge pieces to the side of it.
  Can you send a picture of how you see it to [email protected]