Description
Of simple construction and cheaper materials, the many towering buildings that form the street of cobblestone way are purpose build to house the ever-growing populace of his Majesties’ prospering city.
Updates:
- 3 March 2023 (version 1.1) Now includes Level 1 with a back wall.
Notes for the Cobblestone Way STL:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Note the second building is a mirrored version of the first. Instructions to mirror models.
- Small printer reference included in the zip file
- Product measurements can be found in the image gallery.
- First Published version 1.0
derk442 (verified owner) –
As a suggestion, I think it would be a nice addition to have a 45 / 90 etc degree connector building/piece to give another option other than setting up the buildings in a straight line. Also a middle building so you could have 3+ buildings connected.
Jo Boorer (verified owner) –
Thanks for your suggestion. I will add it to our updates list.
Henrik Andersen (verified owner) –
Hi,
The lvl 1 part of Cobblestone Way hause is not completely flat on the bottom.
I discovered this as I couldnt understand why the print failed so badly.
Best Henrik
Henrik Andersen (verified owner) –
Now I went through the files again lvl. 3 is also not completely level at the bottom, not as much as lvl 1 but still enough to cause hiccups.
Easily fixable in the slicer, if you notice it 🙂
Jo Boorer (verified owner) –
I have pulled both parts you mentioned into cura and sliced them and looked at layer 1, which shows them sitting flat on the build plate.
Can you please send a screenshot of what you are seeing to [email protected]