Name: Castle Low Walls
Brand: Dungeons and Dragons
Availability: InStock

Description

The walls here were lower, allowing a view across the hills to the fields beyond. Maybe one day someone would come and help get her out of this wretched castle. In the meantime, this was freedom enough, to walk in the sunshine and breathe in the breeze.

Updates:

14 June 2017 (version 1.1) Small repair to BA-Mir-RPG-BrickWall-Low-v1.1 & BA-RPG-BrickWall-Low-v1.1.

13 March 2018 (version 2.0) Updated to Triplex.

Notes for Castle Low Walls:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Product measurements can be found in the image gallery.

Additional information

Recommended Printer

FDM or resin printer

Terrain Tinker

Available

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

requires supports for resin printing, Prints without Supports

Scale

32mm Heroic & OpenLOCK

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

19 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

David Holden (verified owner) – August 31, 2020

Hi, is there any chance that the O column could be updated to include the Openlock ‘hole’ on a second second face to allow two walls to connect to it (as a corner piece). Then the same thing but with the Openlock hole on three faces, to allow for it to be an external wall with another wall jutting out from it.

I’m using the magnetic clip with the low walls system. It works great but I can only magnetise a column from one side currently. I’m planning to use them without the flooring at the moment since I use a dungeon floor battle mat.

Sam Campbell – August 31, 2020

Only one magnetic clip will connect into the Low O column at any one time. The floors are usually used for lateral support for holding the walls in with low walls.

RobotvsDinosaur (verified owner) – June 6, 2021

Any chance to make the castle low wall P and Z asymmetrical versions so they are straight on one side?

Nicholas Jebson – June 8, 2021

Its a good idea, we will add it to the updates list.

David Holden (verified owner) – August 31, 2020

Hi, is there any chance that the O column could be updated to include the Openlock ‘hole’ on a second second face to allow two walls to connect to it (as a corner piece). Then the same thing but with the Openlock hole on three faces, to allow for it to be an external wall with another wall jutting out from it.

I’m using the magnetic clip with the low walls system. It works great but I can only magnetise a column from one side currently. I’m planning to use them without the flooring at the moment since I use a dungeon floor battle mat.
- Sam Campbell – August 31, 2020
  
  Only one magnetic clip will connect into the Low O column at any one time. The floors are usually used for lateral support for holding the walls in with low walls.
RobotvsDinosaur (verified owner) – June 6, 2021

Any chance to make the castle low wall P and Z asymmetrical versions so they are straight on one side?
- Nicholas Jebson – June 8, 2021
  
  Its a good idea, we will add it to the updates list.