Crypt Torch Wall

$7.95

Any sales taxes will be calculated in the checkout.

The Crypt Torch wall is a multi-part wall that contains a sleeve for an LED light system to be inserted and separate flame pieces. This set is designed to be used with the TRP Crypts Walls and is compatible with all other OpenLOCK products.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

There is a version of the sleeve with printer supports.

You can use this guide for printing and fitting the Torch Walls with a miniature LED lighting system.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The Crypts beneath the kingdom were lit enough by the torches along the walls that you could see far enough to not knock your head, but not so far that you wouldn’t get lost. Exploring the crypts was made all the more uncomfortable by the occasional flickering of the torches and their sudden extinguishing, now and then, ushered by odd gusts.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Product measurements can be found in the image gallery.

Additional information

Recommended Printer

FDM or resin printer

Terrain Tinker

Available

Infill

100% for resin printing, 10%

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

requires supports for resin printing, Prints without Supports

Scale

32mm Heroic & OpenLOCK

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

How to build 3D Printed OpenLOCK doors

Posted on May 14, 2026May 14, 2026 by Sloane Dougherty

In this article, we’ll cover three different OpenLOCK doors and how to build them. The three types are the sliding door, the hinged door, and the hinged door with the stone cap. Each has its own advantages, but all go together easily. Sliding Door These kinds of OpenLOCK doors are the easiest; all you need… Read more

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

2 Comments

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

21 Comments

Removing supports from the OpenLOCK ports

Posted on November 30, 2024April 17, 2026 by Sloane Dougherty

In this article, we’ll show you how we go about removing the small supports that are printed on all OpenLOCK model ports. These small supports are printed to support the overhangs in the OpenLOCK port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. For this, we recommend using… Read more

6 Comments

Lighting the Torch Walls

Posted on April 24, 2020July 23, 2025 by Matt

In preparing the torch walls you will need to print each piece separately. The torch flames are printed in yellow translucent filament . The Sleeve may need to be sanded to fit cleanly depending on how fine a resolution you print at. To light the torch walls we investigated a number of different miniature LED… Read more

4 Comments

Comments

jon.p.allen.ii (verified owner) – June 24, 2020

Hello – For A-LED-WALL-Crypt-Part-B-v1.0.stl when i open this stl file in photon workshop slicer, i am unable to add supports or raft to the bottom and auto generate supports also does not work. something up with the base model?

Sam Campbell (verified owner) – June 24, 2020

I’ve just verified it’s ok slicing in Cura and Prusa slicer. You may need to re-download the zip, re-orient and reslice.

jon.p.allen.ii (verified owner) – June 24, 2020

Hello – For A-LED-WALL-Crypt-Part-B-v1.0.stl when i open this stl file in photon workshop slicer, i am unable to add supports or raft to the bottom and auto generate supports also does not work. something up with the base model?
- Sam Campbell (verified owner) – June 24, 2020
  
  I’ve just verified it’s ok slicing in Cura and Prusa slicer. You may need to re-download the zip, re-orient and reslice.