Cart (0)

Product Categories+

Crypt Walls


Any sales taxes will be calculated in the checkout.

The Rampage Triplex Crypt Walls feature beautifully detailed walls, columns and a new arch, with two door options. OpenLOCK Triplex gives more flexibility in floor and wall configurations and is fully backward-compatible with all OpenLOCK systems.

You can see more about the Rampage system and OpenLOCK here.

Please download the Base file set to get the Rampage Clip.

This product is part of the Rampage Complete Dungeon. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


The stale air of the crypt works its way into your lungs, while the cold radiating from the coarse stone walls digs its icy claws into your body. Worse than either of these though is the sight of entire walls formed from skeletal remains.


  • 7 July 2017 – TRP-A-Crypt-Arch-v2.0, TRP-A-Crypt-Wall-v2.0, TRP-BA-Crypt-Wall-v2.0 now have front supports.
  • 20 September 2017 (version 2.1) Contains 4 new D Walls, new D door and new D Gate.
  • 15 October 2018 (version 2.2) D Crypt Arches and D Crypt Grate added.  D-TRP-CryptGate-Arch-Supps prints with a middle support beam. D-TRP-CryptGate-Arch will need to be printed with supports on.


  • Right Click and “Save AS” to download the reference sheet below.
  • Product measurements can be found in the image gallery.

Additional information

File Type

STL files in ZIP folder


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Print Volume

100mm x 100mm x 100mm print build volume required


Prints without Supports

4 questions for Crypt Walls

  1. Ryan Fitch

    Is this supposed to be in the Rampage pledge? My code isn’t working for it. I’d gladly pay for the new system if I have to, though.

  2. Shaun Kantor

    I would also like to know if this is part of the old rampage dungeon indiegogo campaign or the TimeWarp Kickstarter’s I funded, or if I have to purchase this set seperatly.

    • Matt Barker

      Yes this is part of that pledge, If you cant access the pledge, please email [email protected] and we will set it up for you

  3. tremblaymichael744

    are they all triplex compatible ? In the description section we cant see the triplex holes on the images below?

    • Matt Barker

      These are not yet triplex, we are working through all the files and updating them to triplex

  4. Jean-Baptiste CANNES

    Is it possible to have D Crypt door without the door (Just the Arch) and to have the door with the Skull as a separated part ? Thanks

    • Nicholas Jebson

      As in removing the slot at the top that the door usually drops down into? We can certainly add it to the updates list.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey