Name: Vomiting Tree
Brand: Age of Sigmar
Availability: InStock

Description

“The ‘Vomitus Necrothaceae’, colloquially known as the Vomiting Tree, or Tree of Death, is a rare and unusual tree that has perplexed botanists across the ages. It is a problematic specimen to study, as it will often devour the inquisitive botanist and vomit the remains in the form of a putrid green liquid. Its behaviour has led them to suspect that this tree has a demonic origin.”

Notes for the Vomiting Tree:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 20%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Raft	Switch raft ON to help print bed adhesion
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

steven – July 24, 2018

Would love to see this without the vomiting aspect, just a really cool tree with skulls and such.
- Sam Campbell – July 25, 2018
  
  Skull tree you say? That is a good suggestion
shollo1010 – March 8, 2020

Hey, I can only add one to my cart, but I want 3. Help.
- Sam Campbell – March 9, 2020
  
  There is only 1 tree model
Ddraig Goch (verified owner) – July 16, 2020

Printing a vomiting tree is finally at the top of my print list. Are trees A, B and C different other than being mirrored for easier variety? I can see A and C are the same file size but B is a different file size.
- Sam Campbell (verified owner) – July 21, 2020
  
  Yes the trees have slight variations.
peacemaker.sad (verified owner) – March 10, 2021

Do these really print without any supports on a resin printer? My slicer is showing 250+ islands that need supporting
- Nicholas Jebson – March 10, 2021
  
  Hey Peacemaker. When we wrote the support suggestions for the vomiting tree, it was when Resin printers were prohibitively expensive, so people were only printing in FDM. You should always turn supports on when printing with resin, even if the older models say it is unnecessary. We will make an effort to re-evaluate some of those older support suggestions to bring them more in line with current printing.
Fetlockk (verified owner) – July 3, 2021

Hoping for a presupported variant to be released soon!
- Mike – July 5, 2021
  
  Hi Fetlockk,
  
  Thanks for your suggestion. We will this on our list of possible model updates to be done. When it is you’ll receive an email with the pre-supported version.
htdpuk (verified owner) – May 20, 2022

It looks to me that A & B are the same or is it just me?
- Jo Boorer – May 24, 2022
  
  Hi
  
  The position of the trunk is the different in A and B.