Cart (0)

Product Categories+

Products by Game Type

Product Categories+

Undead Fluyt

$17.95

The Undead Fluyt is a ship suited for fantasy RPG, Pirate or skirmish tabletop games. Included in the .ZIP file are: separate deck layouts, interior fittings such as barrels and boxes, a removable ‘wake’ that simulates ship movement, cannons, ballista, and rigging clips (original or undead).

This model prints in multiple parts. There is an optional set of ‘bone rigging’ that can be used to rig the ship. For rigging help, check out the general Rigging Guide.

This product is part of the ADD-ON The Lost Islands Complete or Add-On The Lost Ships. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

Beware the tide of death, for it brings nightmares and plague upon all who are cursed to glimpse it.  Constructed in bones of the fallen, with it’s dark magicks and blighted evil, for this is a war ship of the invading undead army.

 

Notes:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • There is no ballista version.
  • Add supports touching build plates if you get too much stringing on the lower section of the hull or if using Cura select “make overhang printable”.
  • Product measurements can be found in the image gallery.

Undead Fluyt Reference

 

Small Printer Reference

 

Fittings Reference

 

 

Undead Fluyt Rigging

You will need 6mm (1/4 inch) and 4mm (3/16 inch) dowel for the masts and black elastic string for the rope. You may need to sand the ends of the dowel to insert into the mast holes easily.

 

 

Wake Reference

 

 

Additional information

Infill

20%

Supports

Prints without Supports, Supports touching buildplate

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Q & A

  1. Avatar

    mrsethhanson (verified owner)

    After looking at the additional information I’m unclear if I should attempt to print without supports? In reviewing the model it would appear I would need them, is that correct?

    • Sam Campbell

      Sam Campbell (verified owner)

      You can attempt to print the lower hull without supports if you’re confident with your printer otherwise we recommend printing with supports.

  2. Avatar

    richard.lierman (verified owner)

    This is the only ship in the lost ships collection without a playable interior. Is that coming?

    • Sam Campbell

      Sam Campbell (verified owner)

      Yes it’s on the future improvements list for this model.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2019 Printable Scenery. Website by Vienna & Bailey