Name: Stalingrad Ruins 2.0
Brand: Flames of War
Availability: InStock

Stalingrad Ruins 2.0

$4.95

Any sales taxes will be calculated in the checkout.

The Stalingrad Ruins 2.0 pack contains a set of pre-configured Stalingrad ruins, which are designed to be printed in three sections.

The Stalingrad Ruins 2.0 set is designed to fit in with the Stalingrad Ruin sets A, B, C ,D, E and F. The scale is set to 15mm for games such as Flames of War. However, they can be re-scaled to 28mm to be used with games like Bolt Action.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Intact buildings were a rare sight in Stalingrad, the furious fighting leaving every structure damaged in some manner.

Notes for Stalingrad Ruins 2.0:

To upscale to 28mm increase size by 1.3.
Right-click on the image below and “Save As” to download the reference sheet for this pack.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, FDM Prints without support
Scale	15mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	66.7%
15mm Wargames	15	1:116	100.0%
HO Scale	20	1:87	133.3%
OO Scale	22	1:76	146.7%
28mm Wargames	28	1:62	186.7%
32mm Heroic & OpenLOCK	32	1:54	213.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Barrie MacDonald – February 26, 2017

Hi Matt
Are the 15mm Stalingrad Buildings capable of being upscaled to 28mm? I appreciate some slicing might be needed, or is it in the “to Do” list to make 28mm versions and some stage.

Cheers Barrie
- Matthew Barker – February 26, 2017
  
  You can scale them up but you will need to cut them into smaller pieces before printing. This is on our to-do list.
  However, you can also do this yourself in meshmixer is you need it right at the moment
lazette2011 – July 29, 2017

At 15mm scale, what are the overall dimensions of the printed piece? Thanks!
- Matt Barker – August 3, 2017
  
  I have updated the product images to show the sizes of the prints
dale – May 4, 2019

Will they scale down to 6mm.
- Sam Campbell – May 6, 2019
  
  They will scale down to 6mm, you will need a small nozzle and print at finer resolution to get good prints.