Cart (0)

Product Categories+

The Factory

(5 customer reviews)


Any sales taxes will be calculated in the checkout.

During sieges factories become there own mini war zones. Soldiers fighting desperate battles to control the shattered husks, the buildings are reduced to.

The Stalingrad28 The Factory ruins, are a full rework of the original Stalingrad ruins for 28mm and includes 50mm x 50mm tiles and 100mm x 100mm tiles.

You can make various small ruins or a huge centre piece. You can also scale down slightly for variety, or scale by .6 for 15mm games.

The File pack contains 34 pieces, which include a wide variety of ruined and non ruined pieces.  As the kit is pre-OpenLOCK, it is designed to be glued together.

This product is part of the APOC Sci-Fi or APOC WW2 Ruins. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.



  • 10 July 2017 – 1.0 Small Mesh repair to Stalingrad-Ruin-E-v1.0.
  • 25 January 2018 – 1.1 All files resized to 28mm scale.
  • 16 February 2018 – 1.2 Complete re-work of the file layout. Two folders, one with the 50×50 tiles and the other with the 100×100 tiles. All tiles resized to fit together at the 28mm scale.
  • 27 March 2018 – 1.3 Corrections made to size.
  • 22 March 2019 – 1.4 StalingradRuinLvl02-Floor and StalingradRuinLvl03-Floor now available in 100×100.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.

50×50 Reference Sheet

100×100 Reference Sheet

Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Prints without Supports


Dimensions and weights are available in the image gallery

5 questions for The Factory

  1. hurricane685 (verified owner)

    The V1.1 update says that the models were updated to 28mm scale, however, when I load them into Cura, they are showing as 80mm tall and have a base of 100mmx100mm. The product page says the bases should be 50mmx50mm, so I was just wondering what the correct size should be for these files? Thanks in advance.

    • Rex Foot (verified owner)

      My apologies, when i updated the tiles sizes i must have missed that section on the product page. Some of the tiles in the pack will be at the 50mmx50mm scale, and others will be at the 100mx100m scale, this because the 100mm tiles are essentially occupying the floor space of two of the smaller tiles, allowing you to make buildings with less individual tiles if you wish. However, all the tiles are seized for the 28mm scale, just some of them take up more floor space than others.

      I will update the page to remove any confusion.

  2. stanleyh2153 (verified owner)

    The 100×100 floor ruin is the wrong file, it is just a repeat of a level 1 corner piece. Can the correct file please be uploaded. Thanks

    • Sam Campbell (verified owner)

      The 100×100 floor ruin file has been removed as it’s a duplicate. The level 1 pieces in this are the ground floor.

  3. rjdeedo (verified owner)

    In the 100×100 package it seems to be missing the second floor and third floor pieces that are just broken floor with no walls (at least according to looking at the photos of the built package on the website).

    • Sam Campbell (verified owner)

      All the broken pieces are in the 50x50mm folder.

  4. Ian Sanderson (verified owner)

    Is there a Build guide

    • Sam Campbell (verified owner)

      There is no build guide at the moment, but this is something we can look at doing in the future.

  5. Jeppz (verified owner)

    Level 02 100×100 only has 2 corners, I assume I can just take one of the level 01 corners (with the right floor pattern) to replace it?

    • Mike

      That’s correct, they are fairly interchangeable so you can build it in a few different ways.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey