Name: The Factory
Brand: Bolt Action
Availability: InStock
Rating: 4.00 (1 reviews)

The Factory

$9.95

Any sales taxes will be calculated in the checkout.

Rated 4.00 out of 5 based on 1 customer rating

The Stalingrad28 The Factory ruins, are a full rework of the original Stalingrad ruins for 28mm and includes 50mm x 50mm tiles and 100mm x 100mm tiles.

You can make various small ruins or a huge centre piece. You can also scale down slightly for variety, or scale by .6 for 15mm games.

The File pack contains 34 pieces, which include a wide variety of ruined and non ruined pieces. As the kit is pre-OpenLOCK, it is designed to be glued together.

This product is part of the APOC Sci-Fi and APOC WW2 Ruins.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

During sieges, factories become their own mini-war zones. Soldiers fighting desperate battles to control the shattered husks, the buildings are reduced to.

Update:

10 July 2017 – 1.0 Small Mesh repair to Stalingrad-Ruin-E-v1.0.
25 January 2018 – 1.1 All files resized to 28mm scale.
16 February 2018 – 1.2 Complete re-work of the file layout. Two folders, one with the 50×50 tiles and the other with the 100×100 tiles. All tiles resized to fit together at the 28mm scale.
27 March 2018 – 1.3 Corrections made to size.
22 March 2019 – 1.4 StalingradRuinLvl02-Floor and StalingradRuinLvl03-Floor now available in 100×100.

Notes for The Factory:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

50×50 Reference Sheet

100×100 Reference Sheet

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Dimensions	Dimensions and weights are available in the image gallery
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

1 question for The Factory

hurricane685 (verified owner) – February 1, 2018

The V1.1 update says that the models were updated to 28mm scale, however, when I load them into Cura, they are showing as 80mm tall and have a base of 100mmx100mm. The product page says the bases should be 50mmx50mm, so I was just wondering what the correct size should be for these files? Thanks in advance.
- Rex Foot (verified owner) – February 1, 2018
  
  My apologies, when i updated the tiles sizes i must have missed that section on the product page. Some of the tiles in the pack will be at the 50mmx50mm scale, and others will be at the 100mx100m scale, this because the 100mm tiles are essentially occupying the floor space of two of the smaller tiles, allowing you to make buildings with less individual tiles if you wish. However, all the tiles are seized for the 28mm scale, just some of them take up more floor space than others.
  
  I will update the page to remove any confusion.
stanleyh2153 (verified owner) – November 18, 2018

The 100×100 floor ruin is the wrong file, it is just a repeat of a level 1 corner piece. Can the correct file please be uploaded. Thanks
- Sam Campbell (verified owner) – November 19, 2018
  
  The 100×100 floor ruin file has been removed as it’s a duplicate. The level 1 pieces in this are the ground floor.
rjdeedo (verified owner) – January 22, 2019

In the 100×100 package it seems to be missing the second floor and third floor pieces that are just broken floor with no walls (at least according to looking at the photos of the built package on the website).
- Sam Campbell (verified owner) – January 22, 2019
  
  All the broken pieces are in the 50x50mm folder.
Ian Sanderson (verified owner) – April 4, 2020

Is there a Build guide
- Sam Campbell (verified owner) – April 6, 2020
  
  There is no build guide at the moment, but this is something we can look at doing in the future.
Rated 4 out of 5

Jeppz (verified owner) – April 15, 2021

Level 02 100×100 only has 2 corners, I assume I can just take one of the level 01 corners (with the right floor pattern) to replace it?
- Mike – April 15, 2021
  
  That’s correct, they are fairly interchangeable so you can build it in a few different ways.