Cart (0)

Product Categories+

Stalingrad Ruins 2.0


Any sales taxes will be calculated in the checkout.

Intact buildings were a rare sight in Stalingrad, the furious fighting leaving every structure damaged in some manner.

The Stalingrad Ruins 2.0 pack contains a set of pre-configured Stalingrad ruins, which are designed to be printed in three sections.

The Stalingrad Ruins 2.0 set is designed to fit in with the Stalingrad Ruin sets A, B, C ,D, E and F. The scale is set to 15mm for games such as Flames of War. However, they can be re-scaled to 28mm to be used with games like Bolt Action.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.



  • To upscale to 28mm increase size by 1.3.
  • Right-click on the image below and “Save As” to download the reference sheet for this pack.

3 questions for Stalingrad Ruins 2.0

  1. Barrie MacDonald

    Hi Matt
    Are the 15mm Stalingrad Buildings capable of being upscaled to 28mm? I appreciate some slicing might be needed, or is it in the “to Do” list to make 28mm versions and some stage.

    Cheers Barrie

    • Matthew Barker

      You can scale them up but you will need to cut them into smaller pieces before printing. This is on our to-do list.
      However, you can also do this yourself in meshmixer is you need it right at the moment

  2. lazette2011

    At 15mm scale, what are the overall dimensions of the printed piece? Thanks!

    • Matt Barker

      I have updated the product images to show the sizes of the prints

  3. dale

    Will they scale down to 6mm.

    • Sam Campbell

      They will scale down to 6mm, you will need a small nozzle and print at finer resolution to get good prints.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey