$4.95
Tall, intact towers were a rarity in Stalingrad, as they often became the victim of collateral damage from shell fire.
The Stalingrad Ruins F – 15mm pack contains a set of pre-configured Stalingrad ruins, which are designed to be printed in multiple sections.
The Stalingrad Ruins 2.0 set is designed to fit in with the Stalingrad Ruin sets 2.0, A, B, C, D and E. The scale is set to 15mm, for games such as Flames of War. However, they can be re-scaled to 28mm to be used with games like Bolt Action.
This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.
Updates:
Notes:
| Infill | 20% |
|---|---|
| Layer Height | .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | Prints without Supports |
You must be logged in to post a question.
My Account 
Mauricio Oliveira –
to scale this to 28mm i need to increase how much in %?
Matt Barker –
To make it 28mm you will need to scale x2 (200%), this will being the wall heights to 80mm
John mullins (verified owner) –
much like the others in Stalingrad packs, these are NOT 15mm Scale. They are 28mm Scale.
Thankfully THIS time I was prepared for this and didnt waste a bunch of time and materials.
Again, these are NOT In 15mm scale. They are 28mm Scale.