Rampage Tower Bundle

Name: Rampage Tower Bundle
Brand: Age of Sigmar
Availability: InStock

Original price was: $59.80.Current price is: $24.95.

Any sales taxes will be calculated in the checkout.

The Rampage Tower Bundle contains multi-level towers based on Rampage tiles.

The tiles have been fused together, so that they print as complete levels. If you want the separate tiles they are located here

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Included in this bundle:

The Small Square Tower Mash Up

Description

The Rampage Tower Bundle contains:

The Large Square Tower
The Small Square Tower Mash up
The Round Tower with Buttress
The Round Tower 2

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, FDM Prints without support
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

kronstedt.anders – July 12, 2020

For any of these towers, can the middle pieces be printed multiple times to create a taller tower? For example, with the Large Square Tower, could I print a few L3 or L4 sections to create a tower that was a half dozen stories tall?
- Sam Campbell – July 13, 2020
  
  Yes, you can print level 3 and 4 of the large Square tower.
Tyler Welch – December 5, 2020

Would these tiles work with the rampage castle walls and gate set or are they intended to be separate towers?
- Sam Campbell – December 7, 2020
  
  These are compatible with the Rampage Castle Walls.
bhrichman – January 19, 2021

What is the printing size for these? I have a resin printer and not sure if I have enough room to print.
- Nicholas Jebson – January 19, 2021
  
  The large square towers maximum footprints are 140.5mm x 140.5mm x 54.7mm
  The large round towers maximum footprints are 137mm x 137mm x 54.7