Stone Stairs

Name: Stone Stairs
Brand: Dungeons and Dragons
Availability: InStock

$4.95

Any sales taxes will be calculated in the checkout.

The Stone Stairs set allows you to make solid stairs in your dungeon or building, that are compatible with all of our OpenLOCK products.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is part of the Rampage Complete Dungeon

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Set into the wall ahead, the sturdy stone steps are a welcome sight, after hours of trying to find a way back up. Hopefully there won’t be any nasty surprises at the top of them.

Updates:

20 June 2017 – Small Mesh repairs to E-A-RPG-StoneStairs-V1.6.
4 May 2018 (version 3.0) Updated to Triplex
18 July 2018 (version 4.2) S tile Stairs added

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
File Type	STL files in ZIP folder
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Print Volume	100mm x 100mm x 100mm print build volume required
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

John Fallara (verified owner) – April 22, 2017

Are you planning to add 1-tile wide (5-foot) versions of these stairs?
- Matthew Barker – April 23, 2017
  
  Yes we are making a new stair system for the Rampage Castle and also upgrading this one which will include a 1 inch wide version
mikekannard (verified owner) – September 8, 2020

Can these be updated with the newer bottom with the x support? I like to print my floor tiles on the side and the X is required for support-less printing.
- Sam Campbell – September 8, 2020
  
  We’ll have a look into but these wont print on their side without supports for the side detail anyway.
mikekannard (verified owner) – September 11, 2020

Hello! Thanks for the previous response! I just wanted to add that I printed the E-A on it’s back and the only supports I had to add were for the base since the back goes pretty flush with the side of the tile.
MJJEPPER (verified owner) – December 4, 2020

Is there a rough stone version for these stairs and the risers? Or at least a timeline for their sale?
- Sam Campbell – December 7, 2020
  
  There are no Rough Stone Stairs at this stage, it’s something we can look at doing in the future.
Trent H – January 3, 2024

Hi all,
Is there any update on rough stone stairs at all?
- Jo Boorer – January 12, 2024
  
  There is no ETA on them at the moment but they are on the list of updates to be done.