Murder Row

Name: Murder Row
Brand: A Song of Ice & Fire
Availability: InStock
Rating: 5.00 (3 reviews)

$12.95

Any sales taxes will be calculated in the checkout.

Rated 5.00 out of 5 based on 3 customer ratings

(3 customer reviews)

Murder Row is an 11 piece modular stacking ruin terrain piece perfect for wargames and roleplay games. Representing the row-housing of the city’s lower class, the middle two levels are designed to be replicable. This allows you to create buildings as tall or as short as you like. It also fits neatly next to the Ruined Gatehouse and Ruined Quarter sets to create a dense cityscape for your games.

This product is part of the Shadowfey Ruins

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The squalid tenements of the old city still stood, row on row. Not everyone in the city had lived luxurious lives, but those who once called these towers home must have been bereft indeed.

Update:

8 June 2021 (version 1.4) Correction made to roof scale. Lv1 and Lv2 have been swapped around to match the photo version but these levels can be swapped.
1 November 2021 (version 1.5) Small printer cuts added. Geometry issues fixed in the Roof.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
First Published version 1.2

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	requires supports for resin printing, Prints without Supports
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How To Assemble Modular Ruins

Posted on May 27, 2021July 25, 2025 by Mike Los

In this video we demonstrate some effective techniques and tips you can use when assembling modular ruins using Murder Row. The same technique will apply for many of the other Shadowfey Ruins. Remember to take care when using superglue and other hazardous materials.

1 Comment

Painting Shadowfey: Ruins

Posted on November 25, 2020July 24, 2025 by Mike Los

The dilapidated and haunted Shadowfey Ruins provide an excellent setting for horror themed encounters and games in ruined cities. This guide will help you achieve that look with a minimum of fuss so you can get gaming! This guide uses the Squatter Townhouse as an example but it is the same method we used for… Read more

4 Comments

3 questions for Murder Row

Rated 5 out of 5

miah.hyatt (verified owner) – June 3, 2021

I started printing these and really like the size of them. I own the Clorehaven kickstarter what would you suggest printing those at to match the size of the Shadowfew buildings? These seem to be a lot closer to 28mm heroic.
- Mike (verified owner) – June 3, 2021
  
  Hi Miah!
  
  Shadowfey has been designed for 28-32mm models (which you might call heroic scale).
  Clorehaven floor tiles are designed for 25mm bases so you could scale them up by 28% to fit 32mm bases or by 20% for 30mm depending on your taste. Just remember to scale up the clips too so they fit!
  I would suggest printing just one or two tiles to see if you are happy with the new size.
  Hope that helps 🙂
lior.shapira (verified owner) – June 5, 2021

I’m not sure where the Corbel fits?
- Mike (verified owner) – June 8, 2021
  
  Hi Lior,
  
  Thanks for getting in touch.
  The corbels fit on the ends of either the level 1 or 2 top pieces to support the balcony above it.
  The levels have been designed so that you can choose which level sits on the other, so having the corbels separate allows you to choose!
  Hope that helps 🙂
jonathan_808 (verified owner) – June 6, 2021

I’ve printed this but the roof doesn’t fit the attic. It looks like it needs to be scaled up 10% to fit.
jonathan_808 (verified owner) – June 8, 2021

Actually I was wrong. Scaled the roof up 10% and it still didn’t fit. It seems to be 10% out but only in one axis 🙁
- Mike (verified owner) – June 8, 2021
  
  Hi Jonathan,
  
  Thanks for pointing this out!
  We’ve rescaled the roof so it fits better. You should receive an email with the updated version 🙂
Rated 5 out of 5

miah.hyatt (verified owner) – June 24, 2021

Fits together great printed on Ender 3 Pro!
Rated 5 out of 5

paulelschner (verified owner) – October 30, 2023

I had problems with Cura 5.5 with the attic file at slicing like others had here with multiple other files aswell. Moving around and rotating the object didn’t help this time. I used the “simplify” option in windows 3d builder to lower the polygon count by value 2 in the program and could slice then without any error.
- Jo Boorer (verified owner) – October 30, 2023
  
  I tried to find the issue. Put the Attic in Cura 5.4 which had no issues so updated to 5.5 and still no issues.
Alec Schwinghamer (verified owner) – January 17, 2025

Hi, I’ve been enjoying your other prints and have a question – your additional information simply says “Prints without supports”. I’m assuming that applies to FDM?