Lost Library of Ithillia

Name: Lost Library of Ithillia
Brand: Age of Sigmar
Availability: InStock

$14.95

Any sales taxes will be calculated in the checkout.

The Lost Library of Ithillia is a building designed for use in tabletop or role-playing games in a fantasy setting. With multiple levels, it is an ideal skirmish building, as it has easy access through the broken walls for mini placement and areas for combat and cover.

This product is part of the Complete Elves

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Battered by the elements and barely recognizable, the tomes of Elven lore lay scattered amid the crumbled bricks and snapped timbers. Trees and shrubs emerge from the steps, and small animals build their homes in the gaps on the rickety shelves. Yet under all the twisted vines and overgrowth, traces of the intricate craftwork and elegant curves of the building remain.

Updates:

30 September 2019 (version 1.2) Correction made to level 2 arch.
11 February 2020 (version 1.3) Alternate cut configuration made of the Lost Library to allow for easier printing.
31 July 2020 (version 1.4) LostLibrary-Ithillia-Lv1-Pt1-v1.2 has had a height adjustment. LostLibrary-Ithillia-Lv1-Pt2and3-v1.1 combined option added. This part will still require support turned on. LostLibrary-Ithillia-Lv1-Pt4-v1.2 and LostLibrary-Ithillia-Lv1-Pt5-v1.2 have had manifold fixes.

Notes for Lost Library of Ithillia STL :

Reference sheet for the small printer option is included in the zip file.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Lost Library of Ithillia STL

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Painting Guide: Library of Ithillia

Posted on April 30, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint The Library of Ithillia The model was initially primed with Army Painter Leather Brown. Stone This is the scheme used for the bricks and stone. Heavy dry-brush: Army Painter Arid Earth. Final highlight: Army Painter Skeleton Bone. Trim This is the scheme used on… Read more

Painting Guide: Gloomwood Trees

Posted on March 14, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint the Gloomwood Trees The models were initially primed with army Painter Leather Brown primer. Stone This is the scheme used on all the stone underneath the roots. Full Layer: Army Painter Leather Brown. Dry Brush: Army Painter Arid Earth. Wood This is the scheme… Read more

Comments

heishi8011 (verified owner) – September 30, 2019

Could you make a un-splited version of Lv1 model for our large print bed printer?
- Sam Campbell (verified owner) – October 2, 2019
  
  I’ll add it to suggestion list.
loy (verified owner) – December 26, 2019

I’ll second the above request. I would like it in 1 piece as well.
donald.plummer (verified owner) – May 2, 2020

Some feedback on this model:

Pt1’s 210.12mm is 0.12mm too tall for the Prusa i3. I’m guessing that extra 0.12mm is unnecessary. Using the “Cut” function in prusa slicer I got it to fit.

Pt2’s hanging staircase needs supports. Instead, merge Pt2 and Pt3, now no supports are necessary for the staircase. Still fits on the printer. I merged with Meshmixer so there wouldn’t be a seam.

There are little curled cornices at the top of the walls that require supports. It appears to me that these are the only features requiring supports. Would have been nice if the entire building was supportless.
- Sam Campbell (verified owner) – May 5, 2020
  
  This has been added to get updated.