Gallows

Name: Gallows
Brand: A Song of Ice & Fire
Availability: InStock

$9.95

Any sales taxes will be calculated in the checkout.

The Gallows is a resin town accessory. Its prints in several pieces, with the stairs, crossbar, door, legs and stairs printing separately. Each piece is provided with a pre-supported options. We suggest using super glue to assemble this piece.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

In times of war, nothing raises morale among the King’s subjects like a good old communal hanging. This a strong reminder that thieves and deserters are a plague to all citizens of the Realm and the noose is the only curative measure for such disloyalty.

Notes for 3D printed Gallows:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
The hole at the end of the latch is for you to use string to pull it.
This pack resin pre-supports.
Product measurements can be found in the image gallery.
First Published version 1.4

Gallows STL

Additional information

Recommended Printer	Resin printer only
Infill	100% for resin printing
Layer Height	0.05 high quality on resin printers
Supports	pre-support version included in download.
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How to paint Medieval Textures

Posted on November 3, 2022July 24, 2025 by Mike Los

In a previous post we covered how to paint the stone walls from the Country and King buildings. This article shows you how to paint medieval textures used on the terrain. In particular, the wood, roof tiles, wattle & daub, and hay. Wood & Roof Tiles After undercoating, basecoat the Wood with Oak Brown and… Read more

2 Comments

Comments

Roem (verified owner) – March 15, 2023

Bought this to print and the platform part 1 did not fit on my Elegoo Mars 2. Please include in the information the size print bed required as this part is quite large.
Would it be possible to get a split version of the platform for resin printing?
- Jo Boorer (verified owner) – March 16, 2023
  
  We cut all our models to fit small printers of 120x120mm. We include the measurements of all our models in the website site photos.
  
  We realise that some printers can have print beds as small as 60x60x60mm. But it would be an an impossible task to cut options for every printer bed size as it would make the downloads too big.
  
  The best option is to cut the models in software like mesh mixer. We do have an article on how to plane cut for those that fall outside 120mm
  
  https://www.printablescenery.com/2021/10/18/how-to-planecut-your-models/