Name: Demon Door
Brand: Chaos
Availability: InStock

Description

Whether due to the cursed symbols bound to the door, or the eyes of the countless skulls that adorn it, any who approach this doorway do so very hesitantly.

Updates:

2 July 2018 (version 2.0) Demon door now has hinges to allow opening and closing.

15 November 2018 – Adjustment made to the Demon Door to allow for better placement along side the Demon Buttress.

16 November 2018 – Further repair made to Demon Doorway.

Notes for Demon Door:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Demon Door Reference

Additional information

Recommended Printer

FDM or resin printer

Terrain Tinker

Available

Infill

10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

requires supports for resin printing, Prints without Supports

Scale

32mm Heroic & OpenLOCK

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Sci-Fi Gothic Assembly Guides

Posted on May 26, 2020July 23, 2025 by Nicholas Jebson

Below you will find instructions for assembling an awesome tables worth of terrain using the Sci-Fi Gothic and Daemon terrain sets, perfect for Warhammer 40K and future dystopic wargames. If you have print fails during the process of creating the ruins do not worry, they are ruins! Eagle eyed people will notice that there are… Read more

3 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

kainfrayer (verified owner) – July 26, 2021

what pins do we use for the door?

Mike – July 26, 2021

Hi Kainfrayer,

The holes for the doors, if printed at 100%, are designed to fit a standard 1.75mm piece of filament to use as pins. It’s more than strong enough to hold the door in and most people will have some spare

kainfrayer (verified owner) – July 26, 2021

what pins do we use for the door?
- Mike – July 26, 2021
  
  Hi Kainfrayer,
  
  The holes for the doors, if printed at 100%, are designed to fit a standard 1.75mm piece of filament to use as pins. It’s more than strong enough to hold the door in and most people will have some spare