Cart (1)

Product Categories+

Command Center Expansion

$7.95

Any sales taxes will be calculated in the checkout.

The Command Center Expansion set contains OpenLOCK walls to build large round buildings and multi-part pieces of furniture including command consoles, chairs and teleporter. These can be used for populating scenes in a modern or sci-fi setting for tabletop skirmish and role-playing games.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is part of the ADD-ON Sanctuary-17. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

At the heart of an operations base a command center is situated from where the monitoring, administration and communication for the modules is controlled from.

To build with this expansion you will need the core Operating Base Modules set.

Updates:

  • 6 November 2020 (version 1.2) Orientation of the Consoles has been changed to allow for easier FDM printing.

Notes:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.
  • First published version 1.2

Locking Pin Reference

Additional information

Infill

10%

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

Prints without Supports

2 questions for Command Center Expansion

  1. davidgrauscher (verified owner)

    Any recommendations on support settings for the consoles? I printed one (using Cura) with supports selected, but it was a bit of a challenge getting the support out (cracked the front, but in a way I can cover up and not worry about). Tried printing without as well, but that print failed.

    • Sam Campbell (verified owner)

      You can try printing the consoles on their ends, rotate on build plate and then lay flat.

  2. Robert Crichton (verified owner)

    I’ve tried printing some consoles, they are already “on end” in the current download, but the ends are not *quite* parallel to the build plane (about a degree off), so the first layer in Cura is only a portion of the curve, with no plate contact on the ends of the “U”.
    This could be a glitch in Cura, but thought you should know.

    • Nicholas Jebson

      Hey Robert, cheers for the info. We will investigate to make sure it is not the files.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2024 Printable Scenery. Website by Vienna & Bailey