Name: Castle Liness - 3d printable Castle
Brand: kb-kingandcountrymedievalpainting
Availability: InStock
Rating: 5.00 (1 reviews)

Description

We teamed up with the folks behind Pillage to make Castle Liness, specifically their game. Pillage is a narrative skirmish game set in the Viking Age, where every raid and every last stand tells a story. Castle Liness gives those stories somewhere to happen. Hold the walls to protect your people and their treasure, or storm the gate, loot the place, and set it to the torch.

Play Pillage

The base game is available now from Victrix.
The new Siege rules are currently crowdfunding. The campaign is in French for the moment, so at this stage it’s one for our French-speaking friends.
English Siege rules are coming from Victrix soon.

Castle Liness now contains modified parts from components in four of our existing Throne & Ash and King and Country bundles. You will get 25% off for each of the bundles that you own:

You will see the bundle discount on the product when you are logged in. If you haven’t purchased a bundle yet, you can do so now and then return here to claim your discount.

Castle Liness uses advanced SystemHEX tessellation.

Hex Guide for Castle Liness

Updates:

15 October 2026 (version 1.2) Now includes small printer cuts.

Notes for Liness Castle 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
First Published version 1.0

Accessories Reference

Adaptors, Ladder, and Buttress Reference

Adaptors, Ladders and Buttress Reference

Kings Quater Reference

Gate and Wall Reference Kings Quarters Reference

Small Tower Reference

Small Towers Reference

Stone Keep Reference

Additional information

Recommended Printer	FDM or resin printer
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

SystemHEX: What’s the scale?

Posted on October 14, 2026November 10, 2026 by Matt Barker

Throne and Ash is designed at 32mm, but because you print it yourself, you can choose to print it at 28mm. Neither scale is “wrong”. The right one depends on how your games actually use the castle. The short answer: Print at 32mm (original size) for skirmish games when your figures will be moving around… Read more

Creating Mixed Hex & Square Layouts with SystemHEX

Posted on September 24, 2026September 24, 2026 by Nick Hutchinson

In this article, we’ll show you how to build square castles and ways to integrate square layouts into SystemHEX. We’ll cover how the square G Adaptors on the Gatehouse work, as well as techniques for using the new Square-to-Hex Wall effectively. The methods in this guide can be used with all of your SystemHEX buildings. … Read more

SystemHEX Video Guides

Posted on November 28, 2025November 28, 2025 by Sloane Dougherty

As the catalogue of Throne & Ash models expands, so do the possibilities of things you can build with SystemHEX. As we release new models and complete the range, we’ll produce videos that explain the models and what you can do with them. Below is a playlist of videos we’ve produced for SystemHEX using the… Read more

How to assemble Throne & Ash 3D printed doors

Posted on June 13, 2025February 25, 2026 by Sloane Dougherty

In this article, we’ll show you how to assemble your 3D printed Throne & Ash doors in a few straightforward steps. We’ll show you how to clean up the parts, fit them together, and check that it’s working. You’ll have functional doors throughout your castle in no time, perfect for when players need to sneak… Read more

5 Comments

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025April 3, 2026 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

17 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025February 25, 2026 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

20 Comments

How to paint Medieval Textures

Posted on November 3, 2022July 24, 2025 by Mike Los

In a previous post we covered how to paint the stone walls from the Country and King buildings. This article shows you how to paint medieval textures used on the terrain. In particular, the wood, roof tiles, wattle & daub, and hay. Wood & Roof Tiles After undercoating, basecoat the Wood with Oak Brown and… Read more

3 Comments

How to paint realistic Stone Walls

Posted on August 11, 2022July 24, 2025 by Mike Los

In this article, we’re going to show you how to paint the realistic looking stone walls from Country and King, and its easier to achieve than you might think. After doing plenty of research, and trial & error, we’ve come up with an effective method to recreate the pale stone look of medieval Europe. You’ll… Read more

24 Comments

1 question for Castle Liness – 3d printable Castle

Jacek Nalborski – September 30, 2026

I think it would be very useful to see examples of how new, modified Stone Keep and King’s Quarters tassellate within regular system hex layouts. Of course if it possible at all.
- Joanne Boorer (verified owner) – October 2, 2026
  
  We are working on a video and blog to release next week to show how this all tessellates.
Rated 5 out of 5

joshua.rouleau (verified owner) – October 1, 2026

Love it. Would love to see others from the King and Country set adapted to System Hex (Stone Fort, Square keep, etc)
- Joanne Boorer (verified owner) – October 2, 2026
  
  Yes, we are planning to do this in the future.
jackieq (verified owner) – October 2, 2026

It would be so great to see a new painting tutorial for this style 🙂
- Joanne Boorer (verified owner) – October 2, 2026
  
  Thanks for your suggestion. We are planning to do this next week.
3s4asfoor (verified owner) – October 5, 2026

how this scale 28 mm but all the old system hex scale 32mm ? will they work with each other ?
- Joanne Boorer (verified owner) – October 5, 2026
  
  Just corrected the scale of this castle to 32mm, as the doors on the King and Country models have been adjusted to meet this scale.
richard.curley (verified owner) – October 13, 2026

So to print this to the scale of Victrix Pillage figures you use 87.5% scale?
- Matt Barker – October 14, 2026
  
  The short answer: Print at 32mm for skirmish games when your figures will be moving around inside and on top of the castle, because you get more room to play. Print at 28mm when you want the castle to look smaller and more proportioned next to your true 28mm miniatures for dioramas.
  
  ive written a blog here for more information https://www.printablescenery.com/2026/10/14/systemhex-whats-the-scale/
Arnoud Koenen – October 16, 2026

i guess you already kind of answered this question, but to be sure, this castle is scaled at 32mm and the “old country bundle” is scaled at 28mm. Since i already printed a lot of stuff for that it would be as simple as scaling this down to 87,5% to get it on the same scale, as i understand.

I do not understand the open lock well enough, but is it integral to this castle? and if i rescale everything the “open lock” system would work at 28mm scale? this i don’t know

Also as you say are things are reworked, are they reworked to be suited to 32mm or to include the open lock? in case of the latter and based on your other comments as long as i stay consistent with my scaling there is a bright future ahead with everything just a tad smaller then intended (correct?)
- Joanne Boorer (verified owner) – October 19, 2026
  
  Thanks for reaching out. Sorry for the confusion. This is part of the Hex System, not OpenLOCK. The King And country buildings used in the Castle Liness are still the same scale, only the doorways have been adjusted in height. If you email me at [email protected], I can help you further.
richard.curley (verified owner) – October 19, 2026

I started printing 100% but found it to big for Victrix Pillage model, I used 87.5% and it seems much better. Only wasted 250g of filament 🙁
richard.curley (verified owner) – October 19, 2026

For the 28mm scale what size of wire to hold the gates?
- Joanne Boorer (verified owner) – October 20, 2026
  
  1.5mm width wire will hold these gates.
Navsarang Singh (verified owner) – October 24, 2026

There are files for the doors and arch plugs for the door gaps that should connect for the walls but I appears that you didn’t add any doors for the ground level door arches. These are narrower than the ones that go on the walls. In the photos it looks like doors exist for this but they don’t seem to be in the files.
- Joanne Boorer (verified owner) – October 27, 2026
  
  I have just checked the physical model, and the door included fits the plugs and the lower-level attached doorways.