Name: Caribbean Church
Brand: Blood & Plunder
Availability: InStock

Description

Churches in the Caribbean often became targets for pirates and marauders.

Updates:

20 June 2017 – 1.1 The Caribbean Church front Lv1-SML-A-v1.1, Caribbean Church front Lv1-SML-B-v1.1, Caribbean Church front Lv1-v1.1 are now at the correct scale.
3 July 2017 – 1.2 The gap between the rubble and walls has been fixed on the Caribbean Church front Lv1-SML-B-v1.2 & Caribbean Church front Lv1-v1.2.
26 February 2019 – 1.3 Locking pins have been added.

Notes for Caribbean Church:

A small printer reference sheet is included in the zip file.
Right Click and “Save As” to download the reference sheet below.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

billy.wardlaw – May 17, 2018

IS there an undamaged version of this?
- Matt Barker – May 17, 2018
  
  At this stage there is only the damaged version
Timothy Reese – May 24, 2018

Came here for the exact same question, it’d be great to have an undamaged version in the next KS.
John Rykert (verified owner) – June 12, 2018

My print bed is 180mm x 180mm. Front Level 1 &2 are over by less then a mm. Please trim it slightly so I can print both in 1 piece. Thanks!
- Matt Barker – June 12, 2018
  
  The best option is to scale it down by slightly so that it fits
Aaron Lawn (verified owner) – August 8, 2018

another vote for a non damaged version!
richard.lierman – January 27, 2020

I want an undamaged version so badly.
- Sam Campbell – January 28, 2020
  
  Thanks for the suggestion, there are a lot of people after a non ruined version of this. We’ll possibly have a look at it in our next Historical kickstarter.
CSmaag – February 15, 2021

I also would love a non-damaged version!
- Nicholas Jebson – February 17, 2021
  
  We will keep this in mind when we re-visit the America’s.
Peter Santucci – February 20, 2022

Undamaged Version Please. With Roof Course.
- Mike (Printable Scenery) – February 21, 2022
  
  Hi Peter,
  
  Thanks for your suggestion, I’ll add it to our list of potential future updates for when we review this set.
Stuart Dobson (verified owner) – March 21, 2025

The windows have large ‘support’ beams across the windows in the stl files. However in the pictures of the finished building they are not there. I assume they should not be? Can you remove them from the stl?
- Joanne Boorer – March 21, 2025
  
  Hi Stuart, can you send a picture to [email protected] of the area you are referring to.
  The only temporary supports I can see are the ones used in the archways.