My Account 
Description
“That Burgomaster had all the money, contacts and protection he could have ever wanted. Fat lot of good it did him in the end. Ha! Grab that shovel, his vault is bound to be buried under here somewhere”
Updates:
- 24 January 2021 (version 1.4) Model scaled to 111% and Burgomaster-Office-Lv-1-Top-v1.4.stl mirrored.
- 26 March 2021 (version 1.5) Small Printer cuts have been added.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Reference sheet for Small printer cuts included in the zip file.
- Product measurements can be found in the image gallery.
- First Published version 1.3
ace3232 (verified owner) –
so i printed all of this but something seems wrong on office lvl 1 bottom and lvl 1 top they dont fit toghter? what am i doing wrong here.lol? i think lvl 1 top v1.2 is backwards
Sam Campbell (verified owner) –
You’re not doing anything wrong. We’ve updated from that version 1.3 to a new version version 1.4 where Model scaled to 111% and Burgomaster-Office-Lv-1-Top-v1.4.stl mirrored. If you’ve printed version any files from 1.3 and wish to continue printing at that scale you will need to scale down version 1.4 to 90%.
lybban (verified owner) –
Even at the last scaling this model is too big fo a 20×20 cm build plate. Will there be a version for normal printers?
Sam Campbell (verified owner) –
Yes we will be releasing smaller cuts.
Pinback (verified owner) –
Is there any chance you could do cut versions of Office lv 1 bottom and Office Lv 1 top in the same way you cut the main roof. They are the only parts not able to fit on a 20×20 bed. Thank you
Nicholas Jebson (verified owner) –
sure thing Pinback, we will get it actioned
Aaron Schoeffler (verified owner) –
Hey! The roof doesn’t fit the ender 3 v2 bed despite everything else printing fine. Do you have a suggestion? It’s like 23.4cm
Nicholas Jebson (verified owner) –
There is a folder with a cut roof for medium printers that will allow you to print it in 2 sections
walkerjh11 (verified owner) –
I DL’d and printed V4 of the files but I was surprised that the different levels do not have any OpenLocks or anything to hold them together when they are stacked. Do you plan to build anything into them so that they will be more stable when they are stacked? I do not want to glue them as I intend to use them in different configurations.
Nicholas Jebson (verified owner) –
Each level of the modular stacking ruins comes in two halves designed to be glued together so that they can then be stacked via the ruined cut. When the ruined cuts sit together they lock quite well so it is very difficult to knock them around and therefore do not need gluing between these sections.
joshuar56 (verified owner) –
This one prints without supports for the most part, but still suffers from poor connection points between the top and bottom parts, also file Burgomaster-Office-Ruined-Piece-1-Base-v1.4 does not print properly. I sliced it with multiple slicers, and there’s an issue with the base. If I sink it about -0.6mm on the build plate to address the issue it will print.
Jo Boorer (verified owner) –
Hi
Thanks for pointing this out. I have put this on our list of model updates.