Cart (1)

Product Categories+

Town Square Tiles – Hagglethorn Hollow

$19.95

Any sales taxes will be calculated in the checkout.

The Town Square tiles are a set of 6 tiles that are based on the original hand-sculpted designs by Johnny Frazer-Allen, they have since been optimized for 3D printing. They make a natural town square to fit the buildings from Hagglethorn Hollow.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

The stone foundations of Hagglethorn Hollow run deep. Through much labor the residents have unsurfaced large segments of heavy cobbled roads beneath the overgrown ruins on which they built their homes. Together they have excavated uniquely masoned alleyways and courtyards from the earth and the many great trees that have found purchase between the crumbling cracks. 

Notes:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Reference sheet for small printers included in the zip file.
  • Product measurements can be found in the image gallery.
  • Copyright Printable Scenery under license from Tabletop Troubadour Games
  • First Published version 1.6

Additional information

Infill

10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

Prints without Supports

4 questions for Town Square Tiles – Hagglethorn Hollow

  1. jay_fabok

    Are their specific buildings from hagglethorn that work with these, or do all the buildings fit?

    • Mike

      Hi Jay,

      Each of the core buildings will fit on the tiles though some of the larger ones will only fit on a specific tile. If you check on the kickstarter campaign you can see each of the buildings on the hand-sculpted tiles.
      There will also be the two extra multi-use tiles you’ll be able to fit any of them on.

  2. Graham (verified owner)

    Hi There are some grouped images on the Kickstarter (side view of a group of models) however none that clearly show which Models fit each tile (that I can see). Can anyone be more specific where this information can be found?
    Many thanks

  3. FlightMaster101 (verified owner)

    Is there a file or are there specifications for the pins needed to assemble these pieces?
    Thanks.

    • Jo Boorer

      These holes are so you can uses pieces of filament to join them together.

  4. Daniel Flood (verified owner)

    Have printed them up and the look super pretty. Dumb question, are they meant to be square once printed and assembled, or are the large gaps between tiles when laid out expected? Not a problem if they are meant to be that way, just wanting to make certain I didn’t stuff it up somewhere in the printing process.

    • Jo Boorer

      Can you take a photo and send it to [email protected] so we can help you.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2024 Printable Scenery. Website by Vienna & Bailey