Cart (0)

Product Categories+

The Wreck


Any sales taxes will be calculated in the checkout.

The Wreck comes as two parts of a wrecked ship. It is designed to be placed flat on a table, to appear as though its lower half is submerged.

This product is part of the The Lost Ships. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


“The man who has experienced shipwreck shudders even at a calm sea.” – Ovid


  • 26 August 2021 (version 1.3) Hull wood grain re-textured to prevent stringing.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • You can slice the bottom of the ship to create various types of sunken wrecks. Some slicers will allow you to rotate the model and sink it into the build plate. Or, you can use the ‘Plane Cut’ tool in Meshmixer.
  • The Brig Wake is included for those who require it.
  • Product measurements can be found in the image gallery.

The Wreck Reference

Small Printer Reference


The Brig Wake Reference

Additional information




Prints without Supports

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

5 questions for The Wreck

  1. jean.rondenet (verified owner)

    hello , just for a better visualisation can you give a approximative dimension of your models ?
    Perhaps in the description or in the additional information.

    • Sam Campbell

      The dimensions are listed in the Cura Screenshots (Bright yellow diagrams). It has X, Y and Z Scale and Size dimensions listed.

  2. Sam Barrie (verified owner)

    I’m looking to do some mix and matching with an intact ship for D&D, but it’s not clear what the intact version of this would be, do you have any pointers?

    • Nicholas Jebson

      Hey Sam, it looks closest in visual to the Brig to me, based on the windows for the Captains Cabin

  3. David Miller (verified owner)

    Hi there, I have printed this file twice in various sizes, painted one, but I did get quite a bit of drooping filament on the sides of the ship where there were overhangs. I printed it on my Ender 3 Pro without supports using the recommended Cura profile, but still had that drooping. Is this something that would be better done with supports? I am wondering if anyone has had any experience with this. Thanks! Great model!

    • Jo Boorer (verified owner)

      Were you using the latest version 1.3?

  4. quovadisjean (verified owner)

    I was wondering if anyone could help. I purchased this and wanted to use a scaled down version to put together a miniature project. I was going to print it in resin, hollowed out version. I assume there inso version with supports available right? Should I be using the whole piece one or the segmented one? The scale I need fits on my printer bed easily.

    • Jo Boorer (verified owner)

      There is no pre-supported version. with you creating a scaled version it would be fine to use the larger pieces.

  5. David Miller (verified owner)

    I’m not sure how to reply Jo, but yes I was using the latest 1.3 version. Thanks!

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey